宜博 / lemonboss

- agent-session-lock.js 新增 acquireLockWithWait：锁被占用时按 pollMs 轮询排队等待
  AGENT_CHAT_QUEUE_WAIT_MS 预算（默认 60s），check-and-set 之间无 await，天然原子；
  等到锁释放就正常执行，等满预算仍抢不到才 429，不再"撞上就立刻拒绝"。
  内部自唤醒（TaskCallback/TaskDispatch 等 selfChat 调用）是 fire-and-forget，之前
  429 等于这次唤醒直接消失，只能靠别处巡检兜底；排队等待让大多数几秒到几十秒的
  短暂碰撞能自然衔接上。
- AgentChat.vue 的 handleSend() 之前拿到 fetch 响应后不检查 r.ok 就直接当 SSE 流读，
  非 200 响应体是普通 JSON，逐行解析全部匹配不上 event/data 前缀，被静默当空流吞掉——
  用户发的消息挂在界面上，没有任何回复也没有报错。现在先判 r.ok，非 200 时读 JSON
  错误体，429 显示"Agent 正忙，请稍后重试"，其他状态显示带状态码的错误提示。
- agent-chat-interrupt.test.js 相应更新：原来断言"并发第二个请求立刻 429"的用例
  改为断言"预算内排队等待、等到就正常执行、两次调用不重叠"，另加一条"预算耗尽仍
  抢不到锁时返回 429"的回归。

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CwGcvMfUcgCcweN5vjhTkn

排查「前端刷新不及时/没有打字机效果」发现现状已是 SSE，不需要换 WebSocket，
真正缺的是三件独立的事：

- 打字机平滑：后端把 ACP chunk 按 10 字符切片再发 SSE，前端用定时器队列
  （agentChatEvents.js 的 createTypewriterQueue）匀速吐出，抹平网络突发。
- 打断并发送：执行中解锁输入框，新增 ⤴ 按钮与 ⏹ Stop 视觉区分；stop 端点
  改为轮询确认 agentChatLocks 真正释放（3 秒预算）再返回 cleaned 字段，
  前端据此决定直接发送还是走"强制发送"兜底。顺手修了一个真实并发漏洞：
  同一 agentId + 同一 convId 的并发请求过去完全没有闸门，只是一直靠前端
  textarea 的 disabled 属性侥幸没被触发。
- 串台加固：把 handleEvent 分发逻辑抽成不依赖组件实例的纯函数
  （agentChatEvents.js），补上 9b1c3f1 那条不变式的回归测试。

已用真实 Claude CLI 会话（非 mock）在浏览器里验证打字机效果、打断并发送
全流程、以及纯 Stop 无回归。

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HDtmdnE6pay9BhwZDAKK6M

company.js 的 hire 路由原来用一发 fetch(...).catch(...) 回环自己去触发 agent-creator
填新角色的定义文件——fire-and-forget，.catch 只接网络层错误，agent-creator 撞车时
（另一次调用正占着它）/api/agent/:agentId/chat 返回 429，被原样当成"成功"吞掉。
新角色因此永久停在 base 空壳 + status=training，唯一痕迹是一行 console.error（且这行
在 429 场景下根本不会触发）。

新增两个模块：
- agent-session-lock.js：从 agent-chat.js 抽出的共享互斥锁存储（纯数据结构，Map +
  超时常量），agent-chat.js 的路由与 hire 路由现在用同一把锁。不能各起一把——
  SessionPool.getOrCreate() 不检查上一次调用有没有跑完，两条路径分开维护锁的话，
  各自都以为自己没有并发，会把第二轮 prompt 发进一个还在处理中的 CLI 会话
  （未定义行为，比现在的"被拒绝丢弃"更危险，见 32 号文档 §二方案 B）。
- agent-body-filler.js：同进程直接调 AgentManager.callAgent，替掉 HTTP 回环。
  拿到锁才发起调用，锁被占用时等一等重试（最多 3 次，5s/15s 退避），重试耗尽在
  本体目录写一个哨兵文件 .body_fill_failed.json（不动 system_agents.status /
  config.json.status——那两个字段还有 draft→active 毕业逻辑在读，改取值域风险
  大于收益）。

company.js 的 hire 路由第 1 步从 fire-and-forget 换成 await，顺带让第 2/3 步
（技能注入、5 秒后触发 Innovator 训练）拿到"agent-creator 真的写完了"这个保证——
第 3 步原来的 setTimeout(5000) 靠的是"假设 5 秒内写完"，现在这个假设不再需要，
但没有顺手删掉那个 setTimeout（不在这次修复范围内，留着无害）。hire 接口本身
仍是异步的，调用方还是立即拿到 training 状态，没有改成同步等待完成。

agent-chat.js 的锁声明改成从共享模块 require，行为逐字不变——用现有 5 个
agent-chat 相关测试文件（36 条）验证过零回归。

新增 agent-body-filler.test.js（6 条）：首次成功、重试后成功、锁被占用时等待
重试、重试耗尽写失败标记、成功后清掉上一轮的失败标记、只释放自己抢到的锁
（不误删第三方在途期间抢到的新锁）。用 vi.useFakeTimers() 控制重试等待，
不用真等 5s/15s。

全量 npx vitest run：151 文件 / 1384 用例，零回归。

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

## 问题 1：work 节点只有 agent.md 进提示词

graph-engine 驱动 work 节点走 PromptBuilder.build()，只读 protocol + agent.md +
companyContextPath + user.md/memory.md/近期记忆。交互式的 agent-chat.js
（buildSystemPrompt）另有一条独立实现，会读 soul.md/identity.md/tools.md/
heartbeat.md/OKR 目标/hippocampus 检索/main_skill/SKILL.md/其它 skills——两条链路
从未同步过。静默到什么程度：agent 照样跑、照样成功，只是少了人格/工具约束/长期
记忆检索，没有任何报错能看出原因。

新增 identity-context.js，抽出 agent-chat 那份逻辑里「读哪些文件」的等价实现（不
读 agent.md/user.md/memory.md/近期记忆——那五样已经被 PromptBuilder 覆盖，避免
重复），接进 PromptBuilder.build() 的非 SKILL.md 分支（scoped skill 那类不是完整
身份，不适用）。用户明确选择「全量对齐」：soul/identity/tools/heartbeat/OKR/
hippocampus/skills 一次性全补，不做裁剪版。

ponytail：没有反过来改 agent-chat.js 去调用这份共享实现——两处现在是「同构但
独立」的两份代码。agent-chat.js 是长期稳定的高频路径，为这次修复去动它风险和
收益不成比例，见 identity-context.js 头注的升级路径。

## 问题 2：org node 角色定义截断到 2000 字，切没切完全不可见

describeRoleDefinition 给 workgraph-planning 的角色定义摘录一直硬切前 2000 字
（有意为之，规划要的是「职能」不是全文）。但切没切、切掉了多少，规划 agent
一无所知——agent.md 写得长一点、职能说明排在后半段，这句关键描述可能根本没
进提示词，且没有任何信号。截断上限不变，改成截断时附一句 ⚠️ 提示 + 完整路径，
给它一条自己去读全文的退路。

## 测试

identity-context.test.js（10 条）：文件读取的每个条件分支、OKR/hippocampus
只在有 agentId 时才查、OKR 抛错不拖累其它内容、skills 目录扫描排除 main_skill。
两个依赖（OkrService/retrieveRelevantPlans）用直接换 CJS module.exports 属性
的手法隔离——本仓库服务层是纯 CommonJS，vi.mock 对嵌套 require() 链路不生效
（实测踩过），且这两个依赖没有 env 覆盖点，真实路径不能进单测。

describe-role-definition-truncation.test.js（3 条）：截断/不截断/本体不存在
三种情况，用真实 system/agents/ 下的 zz- 前缀临时本体（locator.bodyDir 没有
env 覆盖点，只能顺着真实路径走），afterEach 清理不留痕迹。

全量 npx vitest run：150 文件 / 1378 用例，零回归。

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

sessions.size 在此之前没有任何人过问。一次心跳泄漏就攒到过 82 个进程 /
17.5 GB（约 215MB/个），而批 4 刚把公司级并行放开（单公司上限 20）——
机器上同时能起多少完全没有闸门，正是最容易失控的时刻。

AGENT_MAX_SESSIONS，缺省 12，**调用时读不是模块加载时快照**（快照一次就
意味着改配置要重启才生效，而且不报错 —— company-paths.js 顶上那条教训）。
非法值（0/负数/非整数）回落缺省，不当成无限。

满了怎么办：**回收最久没用的空闲会话，而不是直接拒绝**。session 是可复用的
池化资源，杀掉一个空闲的只是让它下次冷启动几秒；拒绝会让一个本来能跑的任务
因为资源原因失败 —— 那是把可恢复的代价换成不可恢复的。

只有一个空闲的都没有（全部在途）时才抛 SessionPoolFullError。刻意抛而不是
静默放行 —— 静默超出正是这个仓库栽过的那一类「超出去但不报错」。

两个实现细节：
- 腾位置发生在 createConnection **之前**：起完再判等于该拦的那个已经起来了
- 空闲态用显式的 idleSince 时间戳记，不去戳 IdleTimer 的私有 _timer；
  getOrCreate 复用时清空它（在途 = 不可被挑走）
- _evictForRoom 故意不 await reset()：腾位置只需要把它从 Map 摘掉，
  子进程收尾可以后台走完；await 的话一次腾位要串行等一次进程退出

守卫：server/tests/unit/session-pool-max.test.js（5 例，不起真进程，
只验判据本身：挑最久空闲的、在途的不许动、全在途就抛、没满不动、非法配置回落）

全量：129 文件 / 1245 测试全绿。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

SessionPool 此前只有三条回收路径：换新会话 / reset() / killActive()。「正常跑完」和
「不可重试的报错」都不在其中，而 getKey 里带了 taskId —— 每个图节点一个新 key，于是
一节点一进程、永不释放，且**不报错**。实测 23 小时漏出 7 个图执行进程。

修法与 agent-chat 侧同一套：调用开始时停表（getOrCreate 里 cancel），调用结束时上弦
（agent-manager 两个出口调 armIdle），计时器只在没有在途请求的间隙走，所以再长的单次
生成也不会被 TTL 打断。旋钮共用 AGENT_SESSION_IDLE_MS（默认 30 分钟）。

守卫：server/tests/unit/session-pool-idle-reclaim.test.js

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

28 号把本体根从 system/templates/ 搬到 system/agents/，agent-locator 就是
为了当这个路径的唯一持有者而建的。但搬完之后仓库里仍有 13 处自己拼这个路径，
等于 locator 只是多了一份副本、没有真正收敛：

  server/routes/company.js            9 处（6 个 TEMPLATES_DIR + 3 个 DATA_DIR，
                                          同一文件里只有 1 处用了 locator）
  server/services/task-service.js     1 处
  server/src/core/skill-config-loader.js  1 处
  server/src/core/devloop/loop-controller.js  1 处
  scripts/extract-agent-prompts.js    1 处

危害不是「不好看」，而是下一次再搬时改 12 处、漏 1 处：漏掉的那处指向一个
不存在的目录，而本仓库读这类路径几乎都包在 fs.existsSync() 守卫里 ——
目录没了不报错，只是静默跳过。这个形状刚在 scripts/demo-harness-company.js
上实测过（base 本体没挂上，demo 跑出来的 agent 没有四段式骨架，脚本照常打印成功）。

局部变量名保留不动（TEMPLATES_DIR / DATA_DIR / SYSTEM_AGENTS_DIR / agentsRoot /
OUT_DIR），只把取值改成 locator.AGENTS_ROOT —— 名字是局部别名，无害；
「路径这个事实」则收敛成一处，下次再搬只改 agent-locator.js。

新增 server/tests/unit/agents-root-single-holder.test.js 锁住这条不变式：
扫 server/ packages/ scripts/ 下所有源码，禁止 path.resolve/join 自己拼
「以 ../ 开头、以 system/agents 结尾」的字面量。带「样本非空」前置断言，
防止扫描路径写错时退化成永远通过。改坏一处实测能精确点名到文件行号。

线索来自并行会话（它在准备改 company.js 时发现同一文件里 7 份定义）。
实际比它看到的更多：它只查了 TEMPLATES_DIR，同文件另有 3 个 DATA_DIR、
另外 3 个文件各 1 处。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

设计见 docs/done/system-design/28-agent-registry-unification.md。

改造前 Agent 本体散在三处（system/agents/ 11 个、system/templates/ 50 个、
data/companies/{id}/agents/ 17 个），同一个 AgentScaffold 被三个 baseDir 实例化。
后果是同一角色在 N 家公司下有 N 份互不相干的副本，模板更新不会同步；
org-coder / org-planner 这类走 hireFromBaseMetaAgent 造出来的本体
legacy_path 指回自己公司目录，永远无法被第二家公司复用。

本次：
- G1 单一注册表：system/templates/ 整体并入 system/agents/，base → _base。
  7 个同名 id 逐个裁决，被丢弃的一份归档到 docs/_archive/ 而非删除。
  source_kind(template/global_agent/company_hired) → origin(builtin/created)。
- G2 运行态下沉：CLI 的 cwd 从本体根改为 system/agents/{aid}/{cid}/{taskId}/。
  memory / conversations 落公司态 {aid}/{cid}/，按公司隔离不串。
  sessionPool 的 key 含 (companyId, taskId)，两家公司调同一 agent 不复用会话。
- G2b 产物不下沉：交付物仍落 data/companies/{cid}/，system/agents/ 只留运行痕迹。
  写入边界按链路分叉——graph 节点走节点私有目录（被 indexNodeOutputs 索引），
  chat 走公司 workspace，同一提示词里不再出现两条互斥指令。
- G3 公司只存引用：data/companies/{id}/agents/ 删除，新增 company_agents 关联表。
  不复用 org_graph_nodes——后者是执行流图，work 层本体被雇时不写它，天生覆盖不全。
- G4 缺则创建：本体缺失时从 _base 复制骨架进 system/agents/{id}/，
  agent-creator 填 agent.md/soul.md 后才从 draft 转 active（哨兵判据，
  骨架未填时哨兵仍在，不许被 hire）。产物即刻是全系统可复用的本体。

新增 server/services/agent-locator.js 收编原先散在 6 处的寻址逻辑。

边界守卫（graph-engine）的豁免从「本体根上五个文件名」放宽为整棵 system/agents/：
新本体的骨架本来就要进 git，gitignore 挡不住 ?? system/agents/{newId}/，
旧判据会把一个真正成功的招聘节点判成 boundary_escape fail。

存量迁移见 scripts/migrate-agent-registry.js（幂等，备份到 data/_migration-backup-*）。

真 Claude CLI E2E 已验证：新建公司 → orggraph-planning 自动规划 →
自动招聘 org-planner/org-coder/org-validator 三节点流水线；
data/companies/{cid}/agents/ 不存在，company_agents 4 行，
system_agents 56→56（零新建私有本体，纯复用），git status 零增量。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

测试 788/788 全绿（76 文件，起点 786），未改任何既有断言。

## 1. idleTimeoutMs 硬编码 120s（「work 节点 → success」跑不通的唯一技术原因）

agent-manager.js 里 `this.config?...?.idleTimeout || 120_000`，且 `...options`
摊在前面被下一行覆盖，两个后果叠加：
- 默认 120 秒，比 stream-executor 自己 JSDoc 写的 30 分钟（1_800_000）小一个数量级，
  也和同进程 ClaudeCliProtocol 早已放到 24h 的 idle 上限完全对不上
- 调用方**无法覆写** —— 传了 options.idleTimeoutMs 也会被盖掉

真 CLI 下的后果：任何「先读几千行源码再动笔」的节点都在动笔前被杀
（readme-writer: idle timeout: no stream data for 120000ms）。

改成 调用方 > agent 配置 > DEFAULT_IDLE_TIMEOUT_MS(30min)，并把常量真的定义出来
—— 上一轮 Master agent 自己诊断出这个问题也动手改了，但引用了未定义的
DEFAULT_IDLE_TIMEOUT_MS，跑起来是 ReferenceError。

## 2. W7 判据在零边最小图上失效

判「org graph 成型了没有」原先看**边数**，理由是「节点 hire() 自己就会造，
拿节点数当信号会废掉『连雇两个人第二个不入图』」——理由成立，但边只是
「writeGraph 跑过」的代理，而真跑里 orggraph-planning 裁出过一张**零条边的单节点图**，
代理当场失效：三条判据全落空 → work 层本体被写进 org_graph_nodes，
下一次下达任务时被 advanceOne 当成 org 节点执行。

改成记录**来源**而不是猜：org_graph_nodes 加 authored_by（idempotent ALTER），
writeGraph 写 'planner'、hire 写 'hire'，判据看有没有 planner 写下的节点。
hire 先记的行随后被 planner 纳入时升格，反向不降级。
存量行 authored_by 为 NULL，回落到原来的边数代理，行为不变。

新增两条用例（既有 9 例造的全是有边的成型图，正好绕开这个形状），
并做过变异验证：把判据改回纯边数，两条精确变红，还原后逐字一致。

## 3. 前后端「能不能下达任务」的规则各写一份且不一致

前端 ACTIVE_RUN 含 blocked、后端 ACTIVE_ROOT_RUN_STATUS 不含（唯一索引
idx_graph_runs_one_active_root 里也没有）。后果：一家公司只要失败过一次，
控制台上就再也下不了第二个任务，而后端其实放行。

规则只留服务端一处：GET /graph-runs 返回 canDispatch / activeRootRunId，
前端照抄结果，不再自己复述取值域。字段缺失时保守放行，交给端点 409 兜底。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

代码层：
- server/services/goals.js → okr-service.js；GoalsService → OkrService
  · this.goalsDir → okrDir，目录 goals/ → okr/
  · ID 前缀 G- → O-；落盘文件 goal.json → objective.json
  · updateGoal → updateObjective，_nextGoalId/_saveGoal 等同步改名
  · parseNodeId 层级名 ['Goal','Objective','KeyResult','SubTask']
    → ['Objective','KeyResult','SubTask','SubTask']（OKR 无 Goal 这一层）
- server/routes/goals.js → okr.js；:goalId → :objectiveId
- 7 处调用点同步：index.js / agent-server.js / agent-chat.js / company.js /
  company-heartbeat-service.js / prompt-builder.js / test-company-e2e.js
- 前端 OkrDashboard.vue / CompanyDashboard.vue 切到 /api/okr（前后端命名终于一致）
- bin/lemon.js 新增 okr create/add-node/list/status

向后兼容（不破坏任何现有调用方）：
- /api/goals/* 与 /api/company/:cid/goals/* 全部保留为别名，与新路径同时挂载
- task dispatch/report 同时接受 objectiveId(新) 与 goalId(旧)，写入时两字段都留
- bin/lemon.js 保留 goal * 命令别名

迁移脚本 scripts/migrate-goals-to-okr.js（npm run okr:migrate）：
- 目录 data/{,companies/*/}goals/ → okr/；条目 G-xxx → O-xxx
- 改写 objective.json 的 id / nodes 的 key / children 数组、_index.json、
  progress.json 的 goalId、history.log 文本、system/tasklog/*.json 的 goalId+nodeId
- --dry-run 预演；幂等；迁移前自动备份为 *.bak-goals（已加入 .gitignore）
- 处理一个反直觉边界：OkrService 构造函数会自动 mkdir 目标目录，"okr/ 已存在"
  不等于"已迁移过"——只要服务被 require 过一次就留下空壳。用 isEmptyOkrDir()
  区分空壳与真实数据，空壳移除后继续迁移。这个 bug 是在 fixture 上验证时发现的。
- 同样在 fixture 上发现并修掉：nodeId 的值漏改写、tasklog 迁移不幂等

验证：新增 server/tests/unit/okr-service.test.js（7 例，覆盖新命名工作正常 +
迁移纯函数的 ID 改写）；全量 npm run test:unit 652 例全绿。

范围说明：NAMING §五 的 benchmark 三分（skill-/agent-/goal-）本轮未动代码——
该节自身的建议就是存量保持现状、只对新增代码强制前缀，因为 benchmark_runs 等表
服务于线上 Arena 排行榜，改表名/路由是另一次独立迁移。
§二-四 的新 agent id 尚不存在实体，待 P2/P3 实现时按规范创建。

已知遗留（非本次引入）：server/scripts/test-company-e2e.js 早已失效——它按
data/{id}/ 找公司，而 company-service 用的是 data/companies/{id}/，在 HEAD 版本
同样全部断言失败。本次只同步了其中的 OKR 命名，未修这个路径问题。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

# Conflicts:
#	system/agents/master/.claude/scheduled_tasks.json

hire() now checks system_agents (source_kind='template') before provisioning a new
company agent: if the role has a shared template row, skip copying agent.md and
instead let AgentManager.getAgentConfig()/PromptBuilder.build() resolve the prompt
from the shared legacy_path at call time, with per-company context assembled from a
new company-context.md. Roles without a template row (including the 6 ids that exist
in both system/agents/ and system/templates/, e.g. evolver-youtube-crawler) fall back
to the existing full-copy behavior unchanged.

- server/services/graph-service.js (new): lookupSharedAgentMd(), upsertOrgGraphNode()
- server/services/company-service.js: hire() reference-mode branch, _provisionReferenceAgent()
- server/src/core/agent-manager.js: getAgentConfig() resolves prompt/companyContextPath
- server/src/core/prompt-builder.js: build() concatenates company-context.md
- unit + integration tests covering all 6 acceptance criteria from
  docs/todo/system-design/27-p1-virtual-reference.md §6, including a regression test
  against the real idearun:evolver-youtube-crawler naming-collision case

Full regression suite (587 tests) passes; independent adversarial review found 0
blocking/major issues.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

First successful real-CLI agent invocation. After REAL.1 (system-prompt
injection) + REAL.2 (mtime-diff file detection) wired, the only remaining
gate was Claude auth. Once CLAUDE_CODE_OAUTH_TOKEN was added to the
project .env, scripts/real-pm-smoke.js completed cleanly:

  Wire-up status:
    ✓ process spawn
    ✓ stream chunks       (3)
    ✓ result text          (Claude returned "DONE")
    ✓ files written        (6: prd/index, feature-tree, user-flows,
                              product/overview, assets/shell.{css,js})
    ✓ git commit           (8cb0493)
  5/5 checks passed · elapsed 163s

PM output quality (real Claude, not mock):
- valid <article data-doc="prd" data-rev="1"> + <section data-rev="1">
  structure per system prompt
- nav links use correct relative paths across 4 chapters
- pid (p-7gwlbl) embedded in HTML metadata
- 中文 prose in the requested 克制 voice

Spec-deviation confirmed (no MCP tool gateway yet — Claude only has
built-in Read/Write/Bash):
- ✗ agent-state/pm.json (no update_runtime_state tool)
- ✗ agent-state/pm-todo.json (no write_todolist tool)
- ✗ history/prd-rev-001.html (no archive_doc tool)
- ✗ timeline.ndjson 'prd_drafted' event (no timeline_append tool)
- ✓ core PRD site IS produced — sufficient to prove pipeline

──── code ────

- scripts/real-pm-smoke.js — loads root .env via dotenv resolved
  from server/node_modules (script dir has no node_modules of its own).

──── ambient ────

Files modified by user/linter while real-CLI work was in flight; merged
without revert:
- server/routes/devloop.js — new GET /:pid/requirements endpoint
- server/services/devloop/path-resolver.js — listProjects() includes
  archived flag + helpers; supports project archive lifecycle
- server/services/devloop/git-vault.js — commit() now accepts files[]
  to scope which paths the commit covers (avoids dragging linked-existing
  user's unstaged files into chore commits)
- server/src/core/devloop/loop-controller.js — createProject uses
  explicit files:['project.json','timeline.ndjson'] for first chore
  commit (avoids same issue)
- server/tests/devloop/path-resolver.test.js — coverage for archive/
  patch/hardDelete helpers
- web/src/components/devloop/RequirementListSection.vue (new)
- web/src/views/DevLoopNewRequirement.vue (new)
- web/src/views/DevLoopDashboard.vue — mounts RequirementListSection
- web/src/views/DevLoopProjects.vue — list page polish
- web/src/router/index.js — adds /devloop/:pid/requirements/new route
- web/src/components/devloop/DashboardHeader.vue — back link tweak

Test results: 233/233 vitest pass (was 230 → +3 path-resolver cases).

──── ⚠ SECURITY NOTE ────

.env is currently TRACKED in git (committed in b1a348b) even though
.gitignore lists it. Existing committed contents include credentials for
DOUBAO / FEISHU / GITHUB / GOOGLE / JWT. The CLAUDE_CODE_OAUTH_TOKEN +
AZURE_OPENAI_API_KEY I just added to .env are NOT in this commit — they
stay in your working tree only.

Recommended follow-up (separate commit):
  git rm --cached .env
  git commit -m "chore: stop tracking .env (already gitignored)"
And rotate every key that was in the previous committed .env.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Two parallel pieces of plumbing — neither has been exercised end-to-end yet
(real CLI gated on `claude /login`; Projects list view served alongside
existing pages):

──── real-CLI wire-up (REAL.1 + REAL.2) ────

LemonBoss now has a clean toggle between mock & real Claude CLI:

- packages/acp-core/protocol/ClaudeCliProtocol.js
  * `options.systemPrompt` → `--append-system-prompt <prompt>` so each
    devloop agent receives its role-specific prompt.md without losing
    Claude's default tool-use conventions.
  * `options.maxBudgetUsd` → `--max-budget-usd` (note: only effective in
    `--print` mode; documented inline).

- server/src/core/devloop/loop-controller.js
  * callAgent now branches on `opts.mock`:
    - mock (P1-P5 path, untouched): fixture sequence + `mock/files` event
    - real: read system/templates/{agent}/prompt.md, pass as systemPrompt,
      snapshot project file mtimes pre-call, diff post-call to compute
      `files_written` — no fixture, no mock/files needed.
  * `_snapshotMtimes(root)` helper walks the project tree (skipping
    .git / node_modules / .cache / .tmp) and returns Map<relPath,mtime>.
  * timeline event payload now carries `real: true` flag.

- scripts/real-pm-smoke.js — minimal real-CLI sanity:
  spawns claude, injects PM prompt, prints which files were written +
  git commit sha. Hard timeout 5min. Single agent → expected spend
  $0.10-0.30 per run when authenticated.

Current status: process spawn + system-prompt injection + stream-json
flow all verified up to the `Not logged in · Please run /login` gate.
Auth is the only remaining blocker for executing the real smoke.

──── project CRUD routes ────

server/routes/devloop.js + server/services/devloop/path-resolver.js
add the lifecycle pieces the Projects list view needs:

- GET    /projects?include_archived=true   list w/ archive filter
- PATCH  /projects/:pid                    edit name + idea_summary
- DELETE /projects/:pid                    soft delete (archive)
- DELETE /projects/:pid?hard=true          hard delete (rm -rf sandbox;
                                            unregister linked)
- POST   /projects/:pid/restore            un-archive

path-resolver exposes matching helpers: listProjects({includeArchived}),
patchProjectMeta(pid,patch), hardDeleteProject(pid).

──── UI ────

- web/src/views/DevLoopProjects.vue (320 lines, new)  — Projects list
- web/src/router/index.js — adds `/devloop` → DevLoopProjects
- web/src/components/devloop/DashboardHeader.vue — back-link now points
  to `/devloop` (project list) instead of `/company`.

──── housekeeping ────

- CLAUDE.md / start.sh — start.sh now boots server/index.js (full route
  surface incl. /api/devloop) instead of the historical agent-server.js;
  docs updated to reflect this.

──── tests (+12) ────

- server/tests/devloop/routes-crud.test.js — 12 cases:
  PATCH validation (4) · soft DELETE + list filter (4) · POST /restore
  (1) · hard DELETE (2) · GET /projects default behavior (1).

Results:
- phase0-verify .. phase5-verify: 8+7+7+6+9+9+7 all pass
- vitest devloop+acp-core: 230/230 (was 218 → +12)

Specs:
- docs/prd/newfunction/_spec/arch-acp-bridge.md · Mock Mode
- docs/prd/newfunction/_spec/plan-migration.md · "自举乐趣" (real path
  prep)

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P4 acceptance gate from plan-migration.md, with one
scope adjustment confirmed up-front: full Vue Dashboard (~1650 lines)
deferred to a future UI phase, replaced by extending the existing
P3 static status page with Sign Off / Abandon / Feedback controls.
All P4 backend acceptance criteria are scripted (phase4-verify.js).

Project status FSM (project.json.status):
- server/src/core/devloop/loop-controller.js
  * draft  →  running  →  shipped  →  shipped-final | abandoned
                ↓             ↓
          l2_blocked    (feedback flips back to running)
          l2_exhausted
  * `_setProjectStatus` validates transitions via STATUS_TRANSITIONS,
    emits SSE `project.status`, writes timeline event.
  * createProject seeds status=draft; runDocsPhase end → running;
    runProject(shipped) → shipped; all dead-end branches (l2_blocked,
    l2_exhausted) also propagate to status via _safeSetStatus.

L3 helpers:
- signOff(pid, opts) — requires status=shipped → shipped-final; commits
  a `chore: sign-off` git entry; rejects other source states with
  InvalidProjectStatusTransition.
- abandon(pid, opts) — any non-terminal → abandoned; commits + calls
  sseBroker.close(pid) to send SSE close frame to subscribers.
- submitFeedback(pid, text, opts) — rejects in shipped-final/abandoned;
  invokes PM in incremental mode; on prd_rev bump writes
  changelog.ndjson prd_rev entry + emits prd.updated SSE; if prior
  status was shipped, flips back to running so next runProject can
  rebuild.

PM incremental mock fixture:
- fixtures/devloop-mock/devloop-pm.json — converted to sequence form:
  * sequence[0] (init) — original P1 fixture (PRD rev=1, 14 files).
  * sequence[1] (incremental) — appends a new section to
    prd/feature/feature-tree.html, bumps article data-rev to 2,
    writes history/prd-rev-002.html.

Baseline happy-path Integrator:
- fixtures/devloop-mock/devloop-integrator.json — single-shot pass.
  Makes vanilla runProject ship without a scenario override.

P4 happy-path scenario:
- fixtures/devloop-mock-scenarios/happy_path/devloop-architect.json —
  single-unit (todo-be only) Architect so end-to-end ship works with
  the baseline Coder/Tester (which only know todo-be paths).

Routes:
- server/routes/devloop.js:
  * POST /projects/:pid/sign-off — 400 InvalidProjectStatusTransition
    when status != 'shipped'; 200 returns { status }.
  * POST /projects/:pid/abandon  — body { by?, reason?, note? }; 400 on
    terminal state; 200 returns { status: 'abandoned' }.
  * POST /projects/:pid/feedback — body { text (req), by?,
    mockFixtureDir? }; 400 on missing text or shipped-final/abandoned;
    200 returns { prd_rev_before, prd_rev_after, status }.
  * POST /projects: now accepts optional `mockFixtureDir` so the same
    fixture dir threads through both the create call and later
    feedback (keeps mock-sequence counters aligned).

Static status page (replaces full Vue Dashboard for P4):
- server/public/devloop-status.html — adds:
  * Status badge in header (color-coded per status).
  * Sign Off / Abandon control buttons (disabled per current state).
  * Feedback textarea + Submit button → POST /feedback.
  * Buttons reflect FSM (signoff only when shipped; abandon/feedback
    locked at terminal states).

Acceptance:
- scripts/phase4-verify.js — 9 steps, full HTTP path:
  ① POST /projects → running
  ② POST /run → shipped
  ③ POST /feedback → PRD rev 1→2 + running (+ changelog entry)
  ④ POST /run again → shipped
  ⑤ POST /sign-off → shipped-final
  ⑥ POST /feedback (after sign-off) → 400
  ⑦ POST /sign-off (after sign-off) → 400
  ⑧ second project: POST /abandon → abandoned
  ⑨ POST /abandon (after abandon) → 400

Tests (+19 cases):
- server/tests/devloop/p4-l3-feedback.test.js
  * 14 FSM cases covering happy path + abandon path + signOff
    pre-conditions + empty feedback rejection.
  * 5 route cases via fetch on ephemeral express app.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- phase3-verify: 9/9
- phase4-verify: 9/9
- vitest devloop+acp-core: 213/213 (was 194 → +19)

Spec deviations explicit:
- Full Vue DevLoopDashboard.vue + Ops 4 sub-pages NOT implemented;
  static status page handles the demoable surface area instead.
- All backend endpoints from §P4 (sign-off, abandon, feedback) are
  complete and tested.

Specs: docs/prd/newfunction/_spec/plan-migration.md · P4 L3 + UI

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P3 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects/:pid/run drives the full project from L1
through L2 with 4 distinct BugTriager branches, observability via SSE
stream + bugs.ndjson + changelog.ndjson, and a tiny static status page.

Mock protocol — fallback dir:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * New options.mockFallbackDir: when scenario dir lacks a per-agent
    fixture, fall back to the baseline fixtures/devloop-mock/.
    Enables scenario dirs to override only the agents that differ
    (Integrator + Triager + sometimes Architect).

Scenario fixtures — 4 L2 branches:
- fixtures/devloop-mock-scenarios/contract_mismatch/
  * Architect: sequence[init, patch] — patch bumps sdd_rev → 2,
    units.json l2_rounds → 1, marks todo-be back to pending.
  * Integrator: sequence[fail (500 vs 201), pass].
  * Triager: contract_mismatch confidence 0.85 with proposed_sdd_patch.
- fixtures/devloop-mock-scenarios/impl_bug/
  * Integrator: sequence[fail (ReferenceError), pass].
  * Triager: impl_bug confidence 0.78 affected=[todo-be], proposed=null.
- fixtures/devloop-mock-scenarios/spec_ambiguous/
  * Triager: confidence 0.4 → LoopController emits human_intervention.
- fixtures/devloop-mock-scenarios/infra_flake/
  * Integrator: sequence[crashed (EADDRINUSE), pass].
  * Triager: infra_flake confidence 0.95 affected=[].
- Each scenario also includes a 1-unit (todo-be) Architect.init fixture
  so baseline Coder/Tester (todo-be) can drive L1.

LoopController:
- server/src/core/devloop/loop-controller.js — adds:
  * runProject(pid, opts) — wave-scheduled L1 via _groupUnitsByWave,
    runIntegrator (devloop-integrator), runTriager (devloop-triager),
    then branch dispatch:
      - contract_mismatch+conf≥0.5 → Architect(patch) writes new
        units.json (already pending, l2_rounds++); emits sdd.updated +
        changelog sdd_rev entry; loop back to L1.
      - impl_bug+conf≥0.5 → unitRegistry.reset(affected); loop, no
        budget burn.
      - spec_ambiguous OR conf<0.5 → emit human_intervention_needed
        SSE, exit l2_blocked.
      - infra_flake → loop directly (no reset, no budget burn).
  * runDocsPhase + runUnit + callAgent all thread opts.mockFixtureDir
    through to the protocol.
  * Auto-attaches sseBroker to unit-registry and bug-tracker on module
    load — every FSM transition + bug op fires an SSE event.
  * bug_open at integration failure, bug_transition → fixed when
    subsequent L2 round passes.

Routes:
- server/routes/devloop.js:
  * POST /projects/:pid/run now defaults to full runProject; ?only=<id>
    still drills into single-unit runUnit (P2 compatibility).
  * GET  /projects/:pid/stream — SSE with Last-Event-ID replay.
  * GET  /projects/:pid/bugs?status=&unit_id=&severity= — bug list.
- server/index.js + agent-server.js mount /public for static assets.

Static status page:
- server/public/devloop-status.html (~100 lines) — pure HTML, polls
  GET /state every 2s, renders unit DAG with status pills + timeline
  tail. URL ?pid= or input box.

Acceptance:
- scripts/phase3-verify.js — 9 steps across 4 scenarios + observability:
  ① contract_mismatch ships at sdd_rev=2 l2_rounds=1, sdd.updated SSE,
    changelog sdd_rev entry, bug open → fixed.
  ② impl_bug ships, sdd_rev=1, l2_rounds=0 (no budget burn).
  ③ spec_ambiguous → l2_blocked + human_intervention_needed SSE.
  ④ infra_flake ships, rerun_integrator action, l2_rounds=0.
  ⑤ Observability: timeline/bugs/changelog/stream.log present.
  ⑥ SSE replay from Last-Event-ID returns ≥2 historical events.

Tests (+13 cases):
- server/tests/devloop/run-project.test.js (11) — 4 scenarios end to
  end + SSE event capture.
- server/tests/devloop/routes.test.js (+2) — full-project mode + bugs
  404. Updated P2 ?only stub test → full-project 404 on unknown pid.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- phase3-verify: 9/9
- vitest devloop+acp-core: 194/194 (was 181 → +13)

Specs:
- docs/prd/newfunction/_spec/plan-migration.md · P3 验收
- docs/prd/newfunction/_spec/loops-l2.md (failure attribution + budget)
- docs/prd/newfunction/_spec/agents-integrator.md
- docs/prd/newfunction/_spec/agents-triager.md

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P2 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects/:pid/run?only=todo-be drives the L1 inner
loop (Coder → Tester → fail → Coder → Tester → pass), with the second
Coder pass demonstrably reflecting on the first failure.

Mock protocol — stateful sequences:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * Mock fixtures now support `sequence: [{chunks,result,files}, ...]`.
    Each protocol.connect() + sendPrompt() consumes the next variant;
    sticks on the last entry after exhausted.
  * Static `ClaudeCliProtocol.resetMockState()` clears counters between
    test runs.

Fixtures:
- fixtures/devloop-mock/devloop-architect.json — units.json now has
  status:pending + retries:0 + retry_budget per unit, plus
  units/{todo-be,todo-db,todo-fe}/spec.json so Tester has acceptance
  criteria to read.
- fixtures/devloop-mock/devloop-coder.json — sequence: implement (with
  intentional missing 400 branch) → retry (reflective fix, coder.log
  attempt:2 has last_failure/last_cause/this_fix/rationale).
- fixtures/devloop-mock/devloop-tester.json — sequence: fail (1/3
  failure with hint pointing at missing body validation) → pass (3/3).

LoopController:
- server/src/core/devloop/loop-controller.js — adds:
  * runUnit(pid, unitId, opts) — drives the L1 loop via unit-registry
    FSM (pending → coding → testing → failed → coding → testing →
    passed/blocked). Calls Coder then Tester per attempt; on failure,
    builds a retry context summarizing prior coder.log + tester
    failures and feeds it into the next Coder prompt.
  * _buildRetryContext + _findLatestTesterResult helpers.
  * callAgent now rewrites units.json.project_id to the real pid after
    mock writes (so unit-registry validation passes).

Route:
- server/routes/devloop.js — adds POST /projects/:pid/run?only=<unitId>.
  Without ?only, returns 501 (full project run lands in P3).

Acceptance:
- scripts/phase2-verify.js — 6 steps:
  1. POST /projects (PM + Architect)
  2. POST /run?only=todo-be returns ok=true, attempts=2, final=passed
  3. FSM trail matches expected 6-step transition sequence
  4. coder.log second entry has all 4 reflection fields
  5. runs/ has ≥2 result.json with first.ok=false, last.ok=true
  6. sandbox cross-unit + prd writes blocked by ToolSandboxError

Tests (5 new cases):
- server/tests/devloop/run-unit.test.js (4) — FSM trail, coder.log
  reflection, runs/ result chain, sandbox enforcement.
- server/tests/devloop/routes.test.js (+3) — POST /run validation,
  full P2 loop, 404 on unknown unit.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- vitest devloop+acp-core: 181/181 (was 174 → +7)

Specs:
- docs/prd/newfunction/_spec/plan-migration.md · P2 验收
- docs/prd/newfunction/_spec/loops-l1.md (retryWithReflection)
- docs/prd/newfunction/_spec/agents-coder.md
- docs/prd/newfunction/_spec/agents-tester.md

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P1 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects produces a runnable todo-demo project with
multi-page PRD/SDD sites, units.json, integration spec, agent-state,
and history snapshots — all via mock agents (no real Claude CLI cost).

Code additions:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * mock mode now emits an extra `mock/files` acp_event when the fixture
    contains a files[] array. LoopController applies it to the project
    root, letting mock agents produce real outputs.
- server/src/core/devloop/loop-controller.js (now ~280 lines)
  * callAgent(pid, agentName, prompt, opts) — single-agent invocation:
    reads system/templates/{agent}/prompt.md, runs mock protocol,
    applies fixture files[], timeline-logs, auto-commits.
  * runDocsPhase(pid, requirement) — orchestrates PM → Architect with
    `docs.complete` timeline marker.
  * getProjectState(pid) — returns project.json + units + prd_rev/sdd_rev
    + timeline tail for the GET /state endpoint.
- server/routes/devloop.js (new)
  * POST /api/devloop/projects — createProject + runDocsPhase
  * GET  /api/devloop/projects
  * GET  /api/devloop/projects/:pid/state
- server/index.js / server/agent-server.js — mount /api/devloop.

Mock fixtures (drive the full acceptance file tree):
- fixtures/devloop-mock/devloop-pm.json
  * 14 files: prd/{index,reading-guide,product/*,feature/*,flow/*,prototype/*}.html,
    prd/assets/{shell.css,shell.js,search-index.json},
    agent-state/{pm.json,pm-todo.json}, history/prd-rev-001.html.
- fixtures/devloop-mock/devloop-architect.json
  * 13 files: sdd/{index,mvcp/*}.html, sdd/assets/*,
    units.json (3 units, DAG), integration/spec.json,
    agent-state/{architect.json,architect-todo.json}, history/sdd-rev-001.html.

Acceptance:
- scripts/phase1-verify.js — spins ephemeral express app, POSTs the
  todo-demo project, asserts 23 expected paths exist + 3 units with
  l2_rounds/l2_budget + git ≥4 commits + timeline events.

Tests (12 new cases):
- server/tests/devloop/loop-controller.test.js (7) — callAgent +
  runDocsPhase + state.
- server/tests/devloop/routes.test.js (5) — POST validation, full
  POST, GET state, 404 on unknown pid.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- vitest devloop+acp-core: 174/174 (was 162 → +12)

Specs: docs/prd/newfunction/_spec/plan-migration.md · P1 Docs MVP

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Final P0 deliverables to make the system bootable in mock mode and
pass `scripts/phase0-verify.js` + `scripts/phase0-test-call.js` end-to-end.

ClaudeCliProtocol (mock mode):
- LEMONBOSS_CLAUDE_MODE=mock or { mock: true } in constructor enables
  mock mode. connect() becomes a no-op; sendPrompt reads fixtures from
  fixtures/devloop-mock/{agentName}.json and emits scripted session_update
  chunks + session/result(mock=true). Falls back to default.json.

Agent registry:
- 6 entries added to system/templates/_registry.json (devloop-pm,
  devloop-architect, devloop-coder, devloop-tester, devloop-integrator,
  devloop-triager).
- Per-agent dirs system/templates/devloop-{role}/ with:
  * prompt.md   — auto-extracted from agents-{role}.html §2.2
  * config.json — cli.toolPolicy.allowedTools + sandbox.writeAllowList

Tooling:
- scripts/extract-agent-prompts.js  — regex-extracts §2.2 system prompts
  from 6 agent HTML pages to system/templates/devloop-{role}/prompt.md.
- server/src/tools/devloop/index.js — central export (tools Map,
  bashHooks, dispatch).
- server/src/core/devloop/loop-controller.js (P0 skeleton) — exposes
  createProject (sandbox alloc + git init + first commit + timeline) and
  commitAfterAgent (per-agent kind-routed git commit + timeline event).

Mock fixtures:
- fixtures/devloop-mock/default.json + devloop-pm.json

Acceptance scripts:
- scripts/phase0-verify.js   — 8 static checks (35 tools loadable,
  6 agents registered, prompt+config wired, bash guard exported, services
  require, fixtures present, git-vault interface, loop-controller).
- scripts/phase0-test-call.js — 7 end-to-end steps under mock mode
  (createProject → CLI connect → sendPrompt chunks → no-op commit returns
  null → real write commits → git log ≥2 → timeline has both events).

vitest.config.js: include packages/**/*.test.js so the mock smoke test
runs in the suite.

Results:
- 162/162 devloop + acp-core tests pass (up from 159).
- phase0-verify: 8/8.
- phase0-test-call: 7/7.

Specs: docs/prd/newfunction/_spec/plan-migration.md · Quick-Start step 7

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

- Moved data/system/ → system/ (agents, templates, skills, data, workspace)
- Updated all server route/service path references
- Updated all script path references
- Updated all documentation references
- Restructured .gitignore for cleaner system/ vs data/ boundary

system/ = platform-shared assets (system agents, template library)
data/ = tenant-specific company instance data

- System agents: 只保留 master (data/system/agents/master)
- Templates: 所有可复用 agent 模板 (data/system/templates/)
- Companies: 公司创建时自动部署 5 个元 Agent (innovator/hunter/digester/evolver/agent-creator)

路径修复:
- agent-chat.js: /list 扫描路径修正 (system/agents + companies/*/agents)
- agent-manager.js: 动态 agent 查找路径修正
- skill-config-loader.js: 修正 agents root
- pipeline-service.js: pipelines 输出到 companies/{id}/pipelines/
- billing.log: 移至 companies/{id}/logs/ 下

Skills 标准化:
- 所有 template agent 建立 .claude/skills/main_skill/SKILL.md
- company-service._copyTemplate() 新增 .claude/ 目录复制
- innovator SKILL.md v3.0: 移除旧 l3-hunt/l2-digest 命名
- 清理重复 agent_creator, 统一为 agent-creator

清理:
- 移除 data/agents, data/workspace, data/logs, data/goals 旧目录
- 清除所有未使用的 DATA_DIR 声明
- 清除 template 中的 conversations/logs/memory 运行态数据

…ter Agent cognitive auto-recovery loop

- Refactored CompanyDashboard into read-only Observer UI
- Enforced strict companyId:roleId namespacing across Node APIs and AgentManager
- Added dynamic <env_status> injection to PromptBuilder for robust context
- Introduced bin/lemon.js CLI for structured LLM tool execution
- Implemented in-stream error interceptors for implicit silent retry loop

- Implement OKR GoalsService with hierarchical node tracking
- Add /api/goals routes and integrate with dispatch/report APIs
- Create Innovator agent with Hunt→Digest→Evolving pipeline
- Create Hunter (l3-hunt), Digester (l2-digest), Evolver (evolving) meta agents
- Copy L1/L2 dependency skills into each agent's .claude/skills/
- Fix buildSystemPrompt to scan ALL skill subdirectories (critical)
- Fix agent list sorting: master pinned top, rest by lastActiveAt
- Rename master-001→master, innovator-001→innovator
- Establish meta agent output convention: write to target agent dir
- Add CXO agent base class for management agents
- Update CEO agent with delegation-first management model

- Agent as Micro-Container: each agent lives in data/agents/{id}/ with full encapsulation
- Persona vs Capability split: agent.md (identity) + .claude/skills/main_skill/SKILL.md (workflow)
- Conversations co-located: data/agents/{id}/conversations/ replaces global dir
- Meta Skills renamed: meta_hunt, meta_digest, meta_creator, meta_evolving, meta_benchmark, meta_research
- Dynamic Hot-Reload: AgentManager.getAgentConfig() falls back to filesystem scan
- Parallel Sub-Agent orchestration via Promise.all with multi-terminal UI
- Removed SQLite dependency, global skills/ directory, and legacy conversations/
- Full architecture docs: 18-local-filesystem-first-agent-encapsulation.md