宜博 / lemonboss

界面走查（真 server + HTTP + 真 AgentManager，底层 mock 协议）已把
manual 模式全流程点通：org 节点起子图 → 下钻 work graph → 单步 →
第 3 步触发回退（徽标 0/3→1/3、run 级 1/5 双层计数同时可见）→
归因记录与 remediation_note 完整送达 → 收敛后父节点结算、左栏前移。

mock 侧补两处缺失接线（都是「四环漏一环」，非新功能）
- ClaudeCliProtocol._sendMockPrompt 按 agent 类型查 fixture：图执行侧的
  agent 名带公司前缀（resolveAgentName 返回 {cid}:{id}），fixture 不该
  按公司复制一份。DevLoop 侧名字不含冒号，行为不变
- graph-engine.defaultAgentExecutor 接住 mock/files 事件：此前只有
  DevLoop 的 loop-controller 接，图执行侧没接，于是 mock 下
  readNodeProduct 永远找不到 attempt-{n}.json，validator 系节点恒 blocked。
  写入限制在节点产物目录内，越界丢弃并留痕

新增 5 份 P3 fixture（workgraph-planning / prd-planning / sdd-planning /
coder-validator / validator-triager），coder-validator 用 sequence 演示
一次回退。图必须放 chunks 不能只放 result——callAgent 的 output 来自
流式 chunks，session/result 的文本不进 output。

控制台入口：CompanyDashboard 加「🕸️ 执行控制台」按钮（路由早已注册，
此前无任何入口，只能手敲 URL）。

scripts/p3-demo-setup.js：手工测试准备脚本（雇人+写图+起 run），头部
写明它是两个已知缺口的绕行，缺口修好后第 1 步即可删。

_registry.json 补齐 6 条本体登记（brd/prd/sdd-planning、goal-benchmark、
benchmark/testdata-validator）——同轮新增的 template-refs 防线测试正是
因为缺这 6 条而变红，防线抓到了「交付与报告不符」。

文档
- 27-REQ R-18：招聘归 workgraph-planning（方案 a）、停用 mock 改真 CLI
- 27-P3B 真实运行前置（新增）：11 个工作项分三批，含现状核实 10 条证据
  （seedTemplates 无运行时调用方、10 条悬空 company_hired 行、
   FAILING_VERDICTS 不含 "fail" 导致验收假放行等）

测试 719/719 全绿（66 文件）。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

Implements the §P4 acceptance gate from plan-migration.md, with one
scope adjustment confirmed up-front: full Vue Dashboard (~1650 lines)
deferred to a future UI phase, replaced by extending the existing
P3 static status page with Sign Off / Abandon / Feedback controls.
All P4 backend acceptance criteria are scripted (phase4-verify.js).

Project status FSM (project.json.status):
- server/src/core/devloop/loop-controller.js
  * draft  →  running  →  shipped  →  shipped-final | abandoned
                ↓             ↓
          l2_blocked    (feedback flips back to running)
          l2_exhausted
  * `_setProjectStatus` validates transitions via STATUS_TRANSITIONS,
    emits SSE `project.status`, writes timeline event.
  * createProject seeds status=draft; runDocsPhase end → running;
    runProject(shipped) → shipped; all dead-end branches (l2_blocked,
    l2_exhausted) also propagate to status via _safeSetStatus.

L3 helpers:
- signOff(pid, opts) — requires status=shipped → shipped-final; commits
  a `chore: sign-off` git entry; rejects other source states with
  InvalidProjectStatusTransition.
- abandon(pid, opts) — any non-terminal → abandoned; commits + calls
  sseBroker.close(pid) to send SSE close frame to subscribers.
- submitFeedback(pid, text, opts) — rejects in shipped-final/abandoned;
  invokes PM in incremental mode; on prd_rev bump writes
  changelog.ndjson prd_rev entry + emits prd.updated SSE; if prior
  status was shipped, flips back to running so next runProject can
  rebuild.

PM incremental mock fixture:
- fixtures/devloop-mock/devloop-pm.json — converted to sequence form:
  * sequence[0] (init) — original P1 fixture (PRD rev=1, 14 files).
  * sequence[1] (incremental) — appends a new section to
    prd/feature/feature-tree.html, bumps article data-rev to 2,
    writes history/prd-rev-002.html.

Baseline happy-path Integrator:
- fixtures/devloop-mock/devloop-integrator.json — single-shot pass.
  Makes vanilla runProject ship without a scenario override.

P4 happy-path scenario:
- fixtures/devloop-mock-scenarios/happy_path/devloop-architect.json —
  single-unit (todo-be only) Architect so end-to-end ship works with
  the baseline Coder/Tester (which only know todo-be paths).

Routes:
- server/routes/devloop.js:
  * POST /projects/:pid/sign-off — 400 InvalidProjectStatusTransition
    when status != 'shipped'; 200 returns { status }.
  * POST /projects/:pid/abandon  — body { by?, reason?, note? }; 400 on
    terminal state; 200 returns { status: 'abandoned' }.
  * POST /projects/:pid/feedback — body { text (req), by?,
    mockFixtureDir? }; 400 on missing text or shipped-final/abandoned;
    200 returns { prd_rev_before, prd_rev_after, status }.
  * POST /projects: now accepts optional `mockFixtureDir` so the same
    fixture dir threads through both the create call and later
    feedback (keeps mock-sequence counters aligned).

Static status page (replaces full Vue Dashboard for P4):
- server/public/devloop-status.html — adds:
  * Status badge in header (color-coded per status).
  * Sign Off / Abandon control buttons (disabled per current state).
  * Feedback textarea + Submit button → POST /feedback.
  * Buttons reflect FSM (signoff only when shipped; abandon/feedback
    locked at terminal states).

Acceptance:
- scripts/phase4-verify.js — 9 steps, full HTTP path:
  ① POST /projects → running
  ② POST /run → shipped
  ③ POST /feedback → PRD rev 1→2 + running (+ changelog entry)
  ④ POST /run again → shipped
  ⑤ POST /sign-off → shipped-final
  ⑥ POST /feedback (after sign-off) → 400
  ⑦ POST /sign-off (after sign-off) → 400
  ⑧ second project: POST /abandon → abandoned
  ⑨ POST /abandon (after abandon) → 400

Tests (+19 cases):
- server/tests/devloop/p4-l3-feedback.test.js
  * 14 FSM cases covering happy path + abandon path + signOff
    pre-conditions + empty feedback rejection.
  * 5 route cases via fetch on ephemeral express app.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- phase3-verify: 9/9
- phase4-verify: 9/9
- vitest devloop+acp-core: 213/213 (was 194 → +19)

Spec deviations explicit:
- Full Vue DevLoopDashboard.vue + Ops 4 sub-pages NOT implemented;
  static status page handles the demoable surface area instead.
- All backend endpoints from §P4 (sign-off, abandon, feedback) are
  complete and tested.

Specs: docs/prd/newfunction/_spec/plan-migration.md · P4 L3 + UI

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P2 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects/:pid/run?only=todo-be drives the L1 inner
loop (Coder → Tester → fail → Coder → Tester → pass), with the second
Coder pass demonstrably reflecting on the first failure.

Mock protocol — stateful sequences:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * Mock fixtures now support `sequence: [{chunks,result,files}, ...]`.
    Each protocol.connect() + sendPrompt() consumes the next variant;
    sticks on the last entry after exhausted.
  * Static `ClaudeCliProtocol.resetMockState()` clears counters between
    test runs.

Fixtures:
- fixtures/devloop-mock/devloop-architect.json — units.json now has
  status:pending + retries:0 + retry_budget per unit, plus
  units/{todo-be,todo-db,todo-fe}/spec.json so Tester has acceptance
  criteria to read.
- fixtures/devloop-mock/devloop-coder.json — sequence: implement (with
  intentional missing 400 branch) → retry (reflective fix, coder.log
  attempt:2 has last_failure/last_cause/this_fix/rationale).
- fixtures/devloop-mock/devloop-tester.json — sequence: fail (1/3
  failure with hint pointing at missing body validation) → pass (3/3).

LoopController:
- server/src/core/devloop/loop-controller.js — adds:
  * runUnit(pid, unitId, opts) — drives the L1 loop via unit-registry
    FSM (pending → coding → testing → failed → coding → testing →
    passed/blocked). Calls Coder then Tester per attempt; on failure,
    builds a retry context summarizing prior coder.log + tester
    failures and feeds it into the next Coder prompt.
  * _buildRetryContext + _findLatestTesterResult helpers.
  * callAgent now rewrites units.json.project_id to the real pid after
    mock writes (so unit-registry validation passes).

Route:
- server/routes/devloop.js — adds POST /projects/:pid/run?only=<unitId>.
  Without ?only, returns 501 (full project run lands in P3).

Acceptance:
- scripts/phase2-verify.js — 6 steps:
  1. POST /projects (PM + Architect)
  2. POST /run?only=todo-be returns ok=true, attempts=2, final=passed
  3. FSM trail matches expected 6-step transition sequence
  4. coder.log second entry has all 4 reflection fields
  5. runs/ has ≥2 result.json with first.ok=false, last.ok=true
  6. sandbox cross-unit + prd writes blocked by ToolSandboxError

Tests (5 new cases):
- server/tests/devloop/run-unit.test.js (4) — FSM trail, coder.log
  reflection, runs/ result chain, sandbox enforcement.
- server/tests/devloop/routes.test.js (+3) — POST /run validation,
  full P2 loop, 404 on unknown unit.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- vitest devloop+acp-core: 181/181 (was 174 → +7)

Specs:
- docs/prd/newfunction/_spec/plan-migration.md · P2 验收
- docs/prd/newfunction/_spec/loops-l1.md (retryWithReflection)
- docs/prd/newfunction/_spec/agents-coder.md
- docs/prd/newfunction/_spec/agents-tester.md

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P1 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects produces a runnable todo-demo project with
multi-page PRD/SDD sites, units.json, integration spec, agent-state,
and history snapshots — all via mock agents (no real Claude CLI cost).

Code additions:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * mock mode now emits an extra `mock/files` acp_event when the fixture
    contains a files[] array. LoopController applies it to the project
    root, letting mock agents produce real outputs.
- server/src/core/devloop/loop-controller.js (now ~280 lines)
  * callAgent(pid, agentName, prompt, opts) — single-agent invocation:
    reads system/templates/{agent}/prompt.md, runs mock protocol,
    applies fixture files[], timeline-logs, auto-commits.
  * runDocsPhase(pid, requirement) — orchestrates PM → Architect with
    `docs.complete` timeline marker.
  * getProjectState(pid) — returns project.json + units + prd_rev/sdd_rev
    + timeline tail for the GET /state endpoint.
- server/routes/devloop.js (new)
  * POST /api/devloop/projects — createProject + runDocsPhase
  * GET  /api/devloop/projects
  * GET  /api/devloop/projects/:pid/state
- server/index.js / server/agent-server.js — mount /api/devloop.

Mock fixtures (drive the full acceptance file tree):
- fixtures/devloop-mock/devloop-pm.json
  * 14 files: prd/{index,reading-guide,product/*,feature/*,flow/*,prototype/*}.html,
    prd/assets/{shell.css,shell.js,search-index.json},
    agent-state/{pm.json,pm-todo.json}, history/prd-rev-001.html.
- fixtures/devloop-mock/devloop-architect.json
  * 13 files: sdd/{index,mvcp/*}.html, sdd/assets/*,
    units.json (3 units, DAG), integration/spec.json,
    agent-state/{architect.json,architect-todo.json}, history/sdd-rev-001.html.

Acceptance:
- scripts/phase1-verify.js — spins ephemeral express app, POSTs the
  todo-demo project, asserts 23 expected paths exist + 3 units with
  l2_rounds/l2_budget + git ≥4 commits + timeline events.

Tests (12 new cases):
- server/tests/devloop/loop-controller.test.js (7) — callAgent +
  runDocsPhase + state.
- server/tests/devloop/routes.test.js (5) — POST validation, full
  POST, GET state, 404 on unknown pid.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- vitest devloop+acp-core: 174/174 (was 162 → +12)

Specs: docs/prd/newfunction/_spec/plan-migration.md · P1 Docs MVP

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Final P0 deliverables to make the system bootable in mock mode and
pass `scripts/phase0-verify.js` + `scripts/phase0-test-call.js` end-to-end.

ClaudeCliProtocol (mock mode):
- LEMONBOSS_CLAUDE_MODE=mock or { mock: true } in constructor enables
  mock mode. connect() becomes a no-op; sendPrompt reads fixtures from
  fixtures/devloop-mock/{agentName}.json and emits scripted session_update
  chunks + session/result(mock=true). Falls back to default.json.

Agent registry:
- 6 entries added to system/templates/_registry.json (devloop-pm,
  devloop-architect, devloop-coder, devloop-tester, devloop-integrator,
  devloop-triager).
- Per-agent dirs system/templates/devloop-{role}/ with:
  * prompt.md   — auto-extracted from agents-{role}.html §2.2
  * config.json — cli.toolPolicy.allowedTools + sandbox.writeAllowList

Tooling:
- scripts/extract-agent-prompts.js  — regex-extracts §2.2 system prompts
  from 6 agent HTML pages to system/templates/devloop-{role}/prompt.md.
- server/src/tools/devloop/index.js — central export (tools Map,
  bashHooks, dispatch).
- server/src/core/devloop/loop-controller.js (P0 skeleton) — exposes
  createProject (sandbox alloc + git init + first commit + timeline) and
  commitAfterAgent (per-agent kind-routed git commit + timeline event).

Mock fixtures:
- fixtures/devloop-mock/default.json + devloop-pm.json

Acceptance scripts:
- scripts/phase0-verify.js   — 8 static checks (35 tools loadable,
  6 agents registered, prompt+config wired, bash guard exported, services
  require, fixtures present, git-vault interface, loop-controller).
- scripts/phase0-test-call.js — 7 end-to-end steps under mock mode
  (createProject → CLI connect → sendPrompt chunks → no-op commit returns
  null → real write commits → git log ≥2 → timeline has both events).

vitest.config.js: include packages/**/*.test.js so the mock smoke test
runs in the suite.

Results:
- 162/162 devloop + acp-core tests pass (up from 159).
- phase0-verify: 8/8.
- phase0-test-call: 7/7.

Specs: docs/prd/newfunction/_spec/plan-migration.md · Quick-Start step 7

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>