宜博 / lemonboss

界面走查（真 server + HTTP + 真 AgentManager，底层 mock 协议）已把
manual 模式全流程点通：org 节点起子图 → 下钻 work graph → 单步 →
第 3 步触发回退（徽标 0/3→1/3、run 级 1/5 双层计数同时可见）→
归因记录与 remediation_note 完整送达 → 收敛后父节点结算、左栏前移。

mock 侧补两处缺失接线（都是「四环漏一环」，非新功能）
- ClaudeCliProtocol._sendMockPrompt 按 agent 类型查 fixture：图执行侧的
  agent 名带公司前缀（resolveAgentName 返回 {cid}:{id}），fixture 不该
  按公司复制一份。DevLoop 侧名字不含冒号，行为不变
- graph-engine.defaultAgentExecutor 接住 mock/files 事件：此前只有
  DevLoop 的 loop-controller 接，图执行侧没接，于是 mock 下
  readNodeProduct 永远找不到 attempt-{n}.json，validator 系节点恒 blocked。
  写入限制在节点产物目录内，越界丢弃并留痕

新增 5 份 P3 fixture（workgraph-planning / prd-planning / sdd-planning /
coder-validator / validator-triager），coder-validator 用 sequence 演示
一次回退。图必须放 chunks 不能只放 result——callAgent 的 output 来自
流式 chunks，session/result 的文本不进 output。

控制台入口：CompanyDashboard 加「🕸️ 执行控制台」按钮（路由早已注册，
此前无任何入口，只能手敲 URL）。

scripts/p3-demo-setup.js：手工测试准备脚本（雇人+写图+起 run），头部
写明它是两个已知缺口的绕行，缺口修好后第 1 步即可删。

_registry.json 补齐 6 条本体登记（brd/prd/sdd-planning、goal-benchmark、
benchmark/testdata-validator）——同轮新增的 template-refs 防线测试正是
因为缺这 6 条而变红，防线抓到了「交付与报告不符」。

文档
- 27-REQ R-18：招聘归 workgraph-planning（方案 a）、停用 mock 改真 CLI
- 27-P3B 真实运行前置（新增）：11 个工作项分三批，含现状核实 10 条证据
  （seedTemplates 无运行时调用方、10 条悬空 company_hired 行、
   FAILING_VERDICTS 不含 "fail" 导致验收假放行等）

测试 719/719 全绿（66 文件）。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

命名轴是「节点在哪一层图里」，把散落的老 agent 归到它实际所处的层级：

  innovator → org-innovator      type='cxo'，是 org graph 层的节点
  hunter    → innovator-hunt     innovator work graph 第 1 阶段
  digester  → innovator-digest   第 2 阶段（输入是 hunt 产出）
  evolver   → innovator-evolver  第 3 阶段

依据：retrain-pipeline.js 的 stepConfigs 就是按 hunter → digester → evolver 顺序
跑的，行 231 明写 steps: ['re_hunt','re_digest','evolve'] —— 这三个本来就是
innovator 的 work graph 三阶段，只是名字没体现出来。

■ 迁移（scripts/migrate-agent-naming.js，--dry-run + 幂等可重跑）
- 8 个目录（system/agents/ + system/templates/），用 git mv 保留历史
- system_agents 表 4 行的 id 与 legacy_path
- 公司实例目录与 company.json.agents[]（本次无公司雇过这四个，实际 0 条）

■ 代码引用点（5 处，手工改）
- retrain-pipeline.js: stepConfigs 的 agent 字段 ×3、agentToStep 映射的 key ×3、
  call_sub_agent 的 evolver 判断
- agent-chat.js: agent 列表过滤里的 innovator
- company.js: 模板训练触发的 agentId

■ 刻意不动的三类同形异义（改了会坏）
1. skill 内部子目录名 {skillDir}/hunter/knowhow.md —— 那是 hunt/digest/evolve
   三阶段的产物目录约定，与 agent 名同形但不同义。涉及 open-api.js:402、
   retrain-pipeline.js:148/374、evolution-loop.js:178、sync-skills.js 的 INTERNAL_DIRS
2. skill 命名空间白名单 —— skill-dir-manager.js 的 CORE_SKILLS、
   migrate-trained-skills.js 的 SYSTEM_SKILLS，那里的 'innovator' 指同名 skill
3. conversations/ 与 system/tasklog/ 下的历史记录 —— 运行态数据，不改写历史

evolver-youtube-crawler 按 §3.4 列为待定，迁移脚本按精确目录名匹配，未误伤。

这四个重命名顺带解决了 27 号文档 §七 挂了很久的 6 个命名冲突 id —— 重命名后
system/agents/ 与 system/templates/ 下不再有同名目录（只剩 agent-creator 与
evolver-youtube-crawler 两个，前者是基础设施角色按规则不改名）。

验证：npm run test:unit 693 全绿（64 files）；test-company-e2e 114/114；
迁移脚本二次执行 dirs=0 dbRows=0 skipped=8（幂等）。

未触碰另一进程正在进行的 P3 文件（graph-engine.js / graph-run-sse.js /
work-graph-db.js / 27-p3-p4-work-graph-console.md / 27-requirement.md）。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

按 27-p3-p4-work-graph-console.md v0.3 实现，三轮开发+校验后测试全绿
（693/693，P2 26/26、DevLoop 230/230 未被打破，web:build 干净）。

服务层
- work-graph-db.js  定义层(work_graph_*) + 运行时层(graph_runs/graph_run_nodes/
  graph_run_loop_records) 五张表；状态转换表照 unit-registry 模式；
  复用 org-graph-service 四项校验 + 新增第五项 fail-fallback-edge
- graph-engine.js   advanceOne 幂等原语；agent_call / subgraph 两种 executor；
  手动与自动共用同一原语；双层熔断（单边 loop_count + 按 root_run_id 共池的
  backward_count）；任务级预算挂 root run；三层暂停/停止级联；
  重试按 contract_hash unchanged 判据
- graph-run-sse.js  按 run_id 广播，状态转换+timeline+SSE 三者原子化
- goal-contract.js  验收契约格式与执行器（R-15.6 验收先行）

引擎泛化（R-15.4）：org graph 与 work graph 走同一套 advanceOne，
定义层两套、运行时层一套，三层下钻用 parent_run_id 链。

R-16 失败归因：validator-reflection 专职归因节点；fail_reason 多边路由
（精确匹配→兜底边→死路）；子 run 收敛透传 success/fail + fail_reason +
remediation_note 三值；infra_flake 不烧任何计数。

路由 / 前端 / 模板
- routes/graph-run.js 八个端点；company.js 任务入口
- WorkGraphCanvas.vue 扩展 UnitsDAG（subgraph 角标、backward 虚线曲线、
  N/3 循环徽标、异常流程视觉降权）；GraphConsole.vue 三栏 + 四 tab 详情
- 五个新 agent 模板：validator-reflection / org-validator / planner-validator /
  coder-validator / workgraph-planning

命名统一（R-15.3 + NAMING §三）：org 节点改为 org-{职能}，
三个 org-graph 模板末节点收敛到 org-validator；org_graph_edges 加 fail_reason
列并把唯一索引补上该列（避免精确边与兜底边互相吞掉）。

三轮校验修掉的主要缺陷：subgraph 重跑不起新子 run 导致永久死锁；
SSE/timeline 零调用方；org 侧 fail_reason 写入被丢弃；fail-fallback-edge
只做了一层；backward_count 跨 run 树重置架空熔断外层；
seedEntryNodes 误点亮只有 fail 入边的节点。

已知缺口见后续提交：remediation_note 仅在 backward 边落库、
total_tokens 预算维度无生产方。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

真实建公司验证时发现的两个串联问题——只有起真服务才暴露得出来，
工作流的集成 agent 全程没起过服务，测试也覆盖不到。

1. 地址错误：orggraph-planning 是被 hire 进公司的，住在
   data/companies/{id}/agents/ 下，寻址必须是 `{companyId}:orggraph-planning`。
   原代码请求裸名 /api/agent/orggraph-planning/chat → 404 Agent not found，
   agent 从未被触发，公司永远停在空壳状态。

2. 失败被静默吞掉：fetch 只在网络层出错时 reject，4xx/5xx 不会 reject，
   所以原来的 .catch() 从头到尾没打印过任何东西。补 res.ok 检查 + 成功日志，
   这类"地址写错"的问题以后能第一时间看见。

修复后端到端验证通过（临时公司 p2-verify，验证完已清理）：
- POST /create → company.goal 落盘、orggraph-planning 被招聘且因 meta-bootstrap
  被正确排除在 org graph 外
- 日志出现 "✅ 已触发 p2-verify:orggraph-planning" + ACP 会话创建
- 30 秒内 agent 产出 4 节点 5 边的图并完成 4 个角色招聘
- agent 选中 dev.json 且**扩充**出模板没有的 code-tester（goal 要求带单测），
  并在规划记录里明确排除了 content.json 的歧义（"Markdown/HTML 是被处理的
  数据格式，不是要产出的内容作品"）——模板作为"起点集合"的设计意图成立
- 产出的图实跑 validateGraph 通过四项校验
- 四个角色 config.json 均为 inheritedFrom=base（元 agent 继承路径生效），
  system_agents 里 scope='company' + owner_company_id 正确
- orggraph-planning 收尾后 heartbeat.enabled=false，正确休眠

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

用 9 个并行 agent 按「文件独占」划分实现 P2 的 T1-T9（T0 已于 2255f09 完成）。
详见 docs/todo/system-design/27-p2-org-graph.md §五。

阶段 A · 数据层
- graph-db.js: org_graph_nodes 加 status/reports_to_node_id（PRAGMA 探测后 ALTER，
  幂等）；全量唯一索引换成 WHERE status='active' 的部分索引，使「fire 后重新 hire
  同角色」可行；org_graph_edges 重建为执行流边（condition/edge_kind/status）
- graph-service.js: ensureOrgGraphNodeIndex 同步改建部分索引，且 upsertOrgGraphNode
  的 ON CONFLICT 必须写成 ON CONFLICT(company_id, role_name) WHERE status='active'
  —— SQLite 的冲突目标要与部分索引谓词逐字对应，否则整条 INSERT 直接失效
- org-graph-service.js（新）: validateGraph 四项校验 + writeGraph/patchGraph/
  getGraph/removeNode，事务化，节点软删除级联失效相关边
- routes/company.js: 四个端点 POST/PATCH/GET /org-graph + POST /org-graph/replan；
  /create 接入自动招聘 orggraph-planning + 异步触发（失败降级为空壳公司）；
  /fire 接入节点软删除

阶段 B · 自动生成
- system/org-graph-templates/{dev,content,ops}.json + README：三张三段式骨架
  （规划→执行→验收，验收失败回退到执行节点），角色名遵循 {domain}-{职能}
- system/templates/orggraph-planning/：新 system agent（type='meta-bootstrap'），
  含 §4.1 八步工作流
- company-service.js: 模板不存在时从 system/templates/base/ 元 agent 继承骨架
  （自动带 RESEARCH→PLAN→EXECUTE→VERIFY 四段式）+ agent-creator 填充，
  新建 agent scope='company'。这是 27-E2E §八bis 元 agent 继承的落地点

阶段 C · 展示
- CompanyDashboard.vue: 组织流程拓扑链渲染 + 空态降级 + 环深度保护

并行编排中发现并修复的三处（均不在原任务划分内）：
- AppNav.vue 建公司表单缺 goal 输入框 —— T0 只改了后端，前端表单没同步，
  company-goal 实际传不进来。这是上一轮 T0 的遗漏
- graph-seed-service.js 会把 type='meta-bootstrap' 的 orggraph-planning 塞回
  org graph，与 hire() 的 guard 不一致
- graph-agent-p1-acceptance.test.js: hire 未知角色的返回从 needs_training 改为
  hired_from_base（T5b 的行为变更），断言同步

验证（独立复核，非 agent 自述）：
- npm run test:unit 676 passed / 63 files（基线 652，+24 为新增的 org-graph 用例）
- npm run web:build 通过
- 三个模板 JSON 实跑 validateGraph 全部通过；四类非法图各自被对应 rule 拒绝；
  writeGraph→getGraph→removeNode 级联验证通过（删中间节点后 3 条边全部失效）

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

起因：逐条比对 27-REQ 的原话与 P2 v0.4，发现四处偏离，其中两处是设计悄悄
改变了原意。本次修正并落定。

代码（P2 §五 T0）：
- company.json 新增 goal 字段（company-goal），create({id,name,goal,description})
- POST /api/company/create 与 update() 同步支持
- 修的是一个实打实的遗漏：R-6 原话是"写入 company 的目标和描述"（两个字段），
  而 create() 一直只有 description。orggraph-planning 规划流水线的主依据本该是
  company-goal，此前根本拿不到。

文档定案（R-13）：
- R-13.1 goal 三层递归：company-goal / task-goal / subagent-goal，与"验收逐层
  递归"对应。澄清 R-12 说的"唯一的那个 goal"其实是 task-goal；三个验收 agent
  保持通用不按层级拆分。记录一处待定：subagent-goal 按执行者命名，与另两个的
  作用域命名轴不一致（按轴应为 subtask-goal）。
- R-13.2 公司类型完全由 orggraph-planning 推断 —— 这条**推翻了我自己记的一个
  缺陷**：审计时我把"不加 type 枚举字段"记为擅自偏离原话，实际那正是所需，
  当前设计无需改动。
- R-13.3 新 agent 从 system/templates/base 元 agent 继承骨架（自动带四段式
  RESEARCH→PLAN→EXECUTE→VERIFY）+ agent-creator 填充，而非直接走 needs_training
  全量培养；新建一律 scope='company'；innovator 训练是可选后置步骤。
  这是 R-9.2"所有 node agent 由元 agent 继承生成"在 P2 的落地点（新增 T5b）。
- R-13.4 org graph 强制单入口，原 open question 关闭。

顺带修掉 P2 的一处内部不一致：§六 承诺"提供手动触发 orggraph-planning 的端点"
给存量公司补图，但 §四.3 API 表和 §五 任务表都没有。已补 POST …/org-graph/replan。

另更正 R-11 中"代码层未执行"的过期表述——OKR 正名已于 74ea1ff 实施完毕。

回归：npm run test:unit 652 例全绿。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

代码层：
- server/services/goals.js → okr-service.js；GoalsService → OkrService
  · this.goalsDir → okrDir，目录 goals/ → okr/
  · ID 前缀 G- → O-；落盘文件 goal.json → objective.json
  · updateGoal → updateObjective，_nextGoalId/_saveGoal 等同步改名
  · parseNodeId 层级名 ['Goal','Objective','KeyResult','SubTask']
    → ['Objective','KeyResult','SubTask','SubTask']（OKR 无 Goal 这一层）
- server/routes/goals.js → okr.js；:goalId → :objectiveId
- 7 处调用点同步：index.js / agent-server.js / agent-chat.js / company.js /
  company-heartbeat-service.js / prompt-builder.js / test-company-e2e.js
- 前端 OkrDashboard.vue / CompanyDashboard.vue 切到 /api/okr（前后端命名终于一致）
- bin/lemon.js 新增 okr create/add-node/list/status

向后兼容（不破坏任何现有调用方）：
- /api/goals/* 与 /api/company/:cid/goals/* 全部保留为别名，与新路径同时挂载
- task dispatch/report 同时接受 objectiveId(新) 与 goalId(旧)，写入时两字段都留
- bin/lemon.js 保留 goal * 命令别名

迁移脚本 scripts/migrate-goals-to-okr.js（npm run okr:migrate）：
- 目录 data/{,companies/*/}goals/ → okr/；条目 G-xxx → O-xxx
- 改写 objective.json 的 id / nodes 的 key / children 数组、_index.json、
  progress.json 的 goalId、history.log 文本、system/tasklog/*.json 的 goalId+nodeId
- --dry-run 预演；幂等；迁移前自动备份为 *.bak-goals（已加入 .gitignore）
- 处理一个反直觉边界：OkrService 构造函数会自动 mkdir 目标目录，"okr/ 已存在"
  不等于"已迁移过"——只要服务被 require 过一次就留下空壳。用 isEmptyOkrDir()
  区分空壳与真实数据，空壳移除后继续迁移。这个 bug 是在 fixture 上验证时发现的。
- 同样在 fixture 上发现并修掉：nodeId 的值漏改写、tasklog 迁移不幂等

验证：新增 server/tests/unit/okr-service.test.js（7 例，覆盖新命名工作正常 +
迁移纯函数的 ID 改写）；全量 npm run test:unit 652 例全绿。

范围说明：NAMING §五 的 benchmark 三分（skill-/agent-/goal-）本轮未动代码——
该节自身的建议就是存量保持现状、只对新增代码强制前缀，因为 benchmark_runs 等表
服务于线上 Arena 排行榜，改表名/路由是另一次独立迁移。
§二-四 的新 agent id 尚不存在实体，待 P2/P3 实现时按规范创建。

已知遗留（非本次引入）：server/scripts/test-company-e2e.js 早已失效——它按
data/{id}/ 找公司，而 company-service 用的是 data/companies/{id}/，在 HEAD 版本
同样全部断言失败。本次只同步了其中的 OKR 命名，未修这个路径问题。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

四处写 _registry.json 的地方都用 JSON.stringify(registry, null, 2) 直接落盘，
不带末尾换行。文件在仓库里是带换行的，导致任何一次 hire()/depositTemplate()/
模板增删改之后，git diff 都会多出一行 "\ No newline at end of file" 的噪音，
把真实的数据变更淹掉。

写入点：
- company-service.js:374  depositTemplate()
- company-service.js:824  _updateTemplateUsedCount()
- routes/company.js:86    PATCH /templates/:templateId
- routes/company.js:120   DELETE /templates/:templateId

同时提交一次真实的运行时数据变更：qa-judge usedCount 7 → 8。

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

# Conflicts:
#	system/agents/master/.claude/scheduled_tasks.json

…_DIR move, stray files

- CLAUDE.md: document DevLoop subsystem (spec-first workflow, project root/git-vault,
  mock mode, L1 loop, unit layout, audit trail) and add missing test commands
- server/routes/agent-chat.js, server/services/task-service.js: TASK_META_DIR moved
  from system/agents/.tasks to system/tasklog
- system/agents/master/.claude/scheduled_tasks.json: scheduled task state update
- remove stray memory/daily/2026-04-02.md and a garbled-filename artifact left under
  system/agents/digester-youtube-crawler/

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

First successful real-CLI agent invocation. After REAL.1 (system-prompt
injection) + REAL.2 (mtime-diff file detection) wired, the only remaining
gate was Claude auth. Once CLAUDE_CODE_OAUTH_TOKEN was added to the
project .env, scripts/real-pm-smoke.js completed cleanly:

  Wire-up status:
    ✓ process spawn
    ✓ stream chunks       (3)
    ✓ result text          (Claude returned "DONE")
    ✓ files written        (6: prd/index, feature-tree, user-flows,
                              product/overview, assets/shell.{css,js})
    ✓ git commit           (8cb0493)
  5/5 checks passed · elapsed 163s

PM output quality (real Claude, not mock):
- valid <article data-doc="prd" data-rev="1"> + <section data-rev="1">
  structure per system prompt
- nav links use correct relative paths across 4 chapters
- pid (p-7gwlbl) embedded in HTML metadata
- 中文 prose in the requested 克制 voice

Spec-deviation confirmed (no MCP tool gateway yet — Claude only has
built-in Read/Write/Bash):
- ✗ agent-state/pm.json (no update_runtime_state tool)
- ✗ agent-state/pm-todo.json (no write_todolist tool)
- ✗ history/prd-rev-001.html (no archive_doc tool)
- ✗ timeline.ndjson 'prd_drafted' event (no timeline_append tool)
- ✓ core PRD site IS produced — sufficient to prove pipeline

──── code ────

- scripts/real-pm-smoke.js — loads root .env via dotenv resolved
  from server/node_modules (script dir has no node_modules of its own).

──── ambient ────

Files modified by user/linter while real-CLI work was in flight; merged
without revert:
- server/routes/devloop.js — new GET /:pid/requirements endpoint
- server/services/devloop/path-resolver.js — listProjects() includes
  archived flag + helpers; supports project archive lifecycle
- server/services/devloop/git-vault.js — commit() now accepts files[]
  to scope which paths the commit covers (avoids dragging linked-existing
  user's unstaged files into chore commits)
- server/src/core/devloop/loop-controller.js — createProject uses
  explicit files:['project.json','timeline.ndjson'] for first chore
  commit (avoids same issue)
- server/tests/devloop/path-resolver.test.js — coverage for archive/
  patch/hardDelete helpers
- web/src/components/devloop/RequirementListSection.vue (new)
- web/src/views/DevLoopNewRequirement.vue (new)
- web/src/views/DevLoopDashboard.vue — mounts RequirementListSection
- web/src/views/DevLoopProjects.vue — list page polish
- web/src/router/index.js — adds /devloop/:pid/requirements/new route
- web/src/components/devloop/DashboardHeader.vue — back link tweak

Test results: 233/233 vitest pass (was 230 → +3 path-resolver cases).

──── ⚠ SECURITY NOTE ────

.env is currently TRACKED in git (committed in b1a348b) even though
.gitignore lists it. Existing committed contents include credentials for
DOUBAO / FEISHU / GITHUB / GOOGLE / JWT. The CLAUDE_CODE_OAUTH_TOKEN +
AZURE_OPENAI_API_KEY I just added to .env are NOT in this commit — they
stay in your working tree only.

Recommended follow-up (separate commit):
  git rm --cached .env
  git commit -m "chore: stop tracking .env (already gitignored)"
And rotate every key that was in the previous committed .env.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Two parallel pieces of plumbing — neither has been exercised end-to-end yet
(real CLI gated on `claude /login`; Projects list view served alongside
existing pages):

──── real-CLI wire-up (REAL.1 + REAL.2) ────

LemonBoss now has a clean toggle between mock & real Claude CLI:

- packages/acp-core/protocol/ClaudeCliProtocol.js
  * `options.systemPrompt` → `--append-system-prompt <prompt>` so each
    devloop agent receives its role-specific prompt.md without losing
    Claude's default tool-use conventions.
  * `options.maxBudgetUsd` → `--max-budget-usd` (note: only effective in
    `--print` mode; documented inline).

- server/src/core/devloop/loop-controller.js
  * callAgent now branches on `opts.mock`:
    - mock (P1-P5 path, untouched): fixture sequence + `mock/files` event
    - real: read system/templates/{agent}/prompt.md, pass as systemPrompt,
      snapshot project file mtimes pre-call, diff post-call to compute
      `files_written` — no fixture, no mock/files needed.
  * `_snapshotMtimes(root)` helper walks the project tree (skipping
    .git / node_modules / .cache / .tmp) and returns Map<relPath,mtime>.
  * timeline event payload now carries `real: true` flag.

- scripts/real-pm-smoke.js — minimal real-CLI sanity:
  spawns claude, injects PM prompt, prints which files were written +
  git commit sha. Hard timeout 5min. Single agent → expected spend
  $0.10-0.30 per run when authenticated.

Current status: process spawn + system-prompt injection + stream-json
flow all verified up to the `Not logged in · Please run /login` gate.
Auth is the only remaining blocker for executing the real smoke.

──── project CRUD routes ────

server/routes/devloop.js + server/services/devloop/path-resolver.js
add the lifecycle pieces the Projects list view needs:

- GET    /projects?include_archived=true   list w/ archive filter
- PATCH  /projects/:pid                    edit name + idea_summary
- DELETE /projects/:pid                    soft delete (archive)
- DELETE /projects/:pid?hard=true          hard delete (rm -rf sandbox;
                                            unregister linked)
- POST   /projects/:pid/restore            un-archive

path-resolver exposes matching helpers: listProjects({includeArchived}),
patchProjectMeta(pid,patch), hardDeleteProject(pid).

──── UI ────

- web/src/views/DevLoopProjects.vue (320 lines, new)  — Projects list
- web/src/router/index.js — adds `/devloop` → DevLoopProjects
- web/src/components/devloop/DashboardHeader.vue — back-link now points
  to `/devloop` (project list) instead of `/company`.

──── housekeeping ────

- CLAUDE.md / start.sh — start.sh now boots server/index.js (full route
  surface incl. /api/devloop) instead of the historical agent-server.js;
  docs updated to reflect this.

──── tests (+12) ────

- server/tests/devloop/routes-crud.test.js — 12 cases:
  PATCH validation (4) · soft DELETE + list filter (4) · POST /restore
  (1) · hard DELETE (2) · GET /projects default behavior (1).

Results:
- phase0-verify .. phase5-verify: 8+7+7+6+9+9+7 all pass
- vitest devloop+acp-core: 230/230 (was 218 → +12)

Specs:
- docs/prd/newfunction/_spec/arch-acp-bridge.md · Mock Mode
- docs/prd/newfunction/_spec/plan-migration.md · "自举乐趣" (real path
  prep)

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

…b-pages + UI endpoints)

Completes the §P4 acceptance UI scope that was deferred in commit
0594b1d. Adds the full Vue Dashboard + Ops sub-pages with live SSE
stream + auto-reconnect, unit DAG with detail drawer, PRD/SDD diff
panel, feedback modal, and 4 ops views (Bugs / Loops / Changelog /
Progress).

Vue surface (≈1480 lines):
- web/src/views/DevLoopDashboard.vue (~110 lines)
  * 4-region grid: status header / loop bar / units DAG / live stream /
    PRD diff. Polls /state every 2.5s; opens feedback modal & unit
    drawer; mounts Sign Off / Abandon controls.
- web/src/views/DevLoopOps.vue (~50 lines) — tab container.
- web/src/components/devloop/DashboardHeader.vue
  * Status badge (7 states color-coded), NEW REQUIREMENT button,
    Sign Off / Abandon buttons (disabled per FSM), Ops nav link.
- web/src/components/devloop/LoopStatusBar.vue
  * 4-phase pipeline (Docs → L1 → L2 → Ship), highlights active phase.
- web/src/components/devloop/UnitsDAG.vue
  * SVG DAG rendered from topological waves; per-unit status color;
    click → emits select → opens UnitDrawer.
- web/src/components/devloop/UnitDrawer.vue
  * Slide-in panel showing unit metadata + last 3 runs + result
    summary + coder.log tail (last 1KB).
- web/src/components/devloop/LiveAgentStream.vue
  * EventSource subscriber listening to project.status,
    unit.state, integration.result, triage.result, sdd.updated,
    prd.updated, human_intervention_needed, etc. Manual 5s reconnect
    on disconnect (browser's built-in Last-Event-ID is honored).
- web/src/components/devloop/PrdDiffPanel.vue
  * Reads changelog.ndjson, renders prd_rev / sdd_rev entries with
    trigger labels.
- web/src/components/devloop/FeedbackModal.vue
  * POSTs /feedback with PM incremental — shows rev bump on success.
- web/src/components/devloop/ops/BuglistView.vue
  * Filterable bug table; status badges; severity / category columns.
- web/src/components/devloop/ops/LoopLogView.vue
  * Timeline grouped by L1 (unit.*) / L2 (integration/triage/sdd/l2_*) /
    L3 (project.status/shipped/prd.updated/human_intervention) /
    System (rest). Free-text substring filter.
- web/src/components/devloop/ops/ChangelogView.vue
  * Tabular prd_rev/sdd_rev entries with by/trigger/summary columns.
- web/src/components/devloop/ops/ProgressView.vue
  * 6 metric cards (status, PRD rev, SDD rev, units passed bar,
    L2 rounds bar, open bugs) + per-unit breakdown table.

Router:
- web/src/router/index.js — adds:
  * /devloop/:pid              → DevLoopDashboard
  * /devloop/:pid/ops/:tab(bugs|loops|changelog|progress) → DevLoopOps

Backend UI-supporting endpoints (server/routes/devloop.js):
- GET /api/devloop/projects/:pid/timeline?limit=N
    Reads timeline.ndjson, returns last N events reversed.
- GET /api/devloop/projects/:pid/changelog
    Returns full changelog.ndjson entries reversed.
- GET /api/devloop/projects/:pid/units/:unitId
    Returns { unit, runs (last 3 result.json), coder_log_tail }.
    404 on unknown unit.

Tests (+5 cases):
- server/tests/devloop/routes.test.js — new P5 UI endpoints block:
  * timeline / changelog / units happy-paths
  * 404 on unknown unit and unknown pid

Acceptance:
- scripts/phase5-verify.js — 7 steps:
  ① Vue build artifacts (DevLoopDashboard.js + DevLoopOps.js chunks)
  ② POST /projects → state returns status + units
  ③ GET /timeline returns events
  ④ GET /changelog returns entries
  ⑤ GET /units/todo-be returns unit + runs
  ⑥ GET /bugs returns bug list
  ⑦ SSE /stream delivers ≥1 event after a triggering feedback POST

Vue build:
- npm run web:build → DevLoopDashboard chunk 15.63 kB,
  DevLoopOps chunk 9.09 kB, both with co-loaded CSS bundles.

Results — all 7 phase gates green:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- phase3-verify: 9/9
- phase4-verify: 9/9
- phase5-verify: 7/7
- vitest devloop+acp-core: 218/218 (was 213 → +5)

Specs: docs/prd/newfunction/_spec/plan-migration.md · P4 L3 + UI

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P4 acceptance gate from plan-migration.md, with one
scope adjustment confirmed up-front: full Vue Dashboard (~1650 lines)
deferred to a future UI phase, replaced by extending the existing
P3 static status page with Sign Off / Abandon / Feedback controls.
All P4 backend acceptance criteria are scripted (phase4-verify.js).

Project status FSM (project.json.status):
- server/src/core/devloop/loop-controller.js
  * draft  →  running  →  shipped  →  shipped-final | abandoned
                ↓             ↓
          l2_blocked    (feedback flips back to running)
          l2_exhausted
  * `_setProjectStatus` validates transitions via STATUS_TRANSITIONS,
    emits SSE `project.status`, writes timeline event.
  * createProject seeds status=draft; runDocsPhase end → running;
    runProject(shipped) → shipped; all dead-end branches (l2_blocked,
    l2_exhausted) also propagate to status via _safeSetStatus.

L3 helpers:
- signOff(pid, opts) — requires status=shipped → shipped-final; commits
  a `chore: sign-off` git entry; rejects other source states with
  InvalidProjectStatusTransition.
- abandon(pid, opts) — any non-terminal → abandoned; commits + calls
  sseBroker.close(pid) to send SSE close frame to subscribers.
- submitFeedback(pid, text, opts) — rejects in shipped-final/abandoned;
  invokes PM in incremental mode; on prd_rev bump writes
  changelog.ndjson prd_rev entry + emits prd.updated SSE; if prior
  status was shipped, flips back to running so next runProject can
  rebuild.

PM incremental mock fixture:
- fixtures/devloop-mock/devloop-pm.json — converted to sequence form:
  * sequence[0] (init) — original P1 fixture (PRD rev=1, 14 files).
  * sequence[1] (incremental) — appends a new section to
    prd/feature/feature-tree.html, bumps article data-rev to 2,
    writes history/prd-rev-002.html.

Baseline happy-path Integrator:
- fixtures/devloop-mock/devloop-integrator.json — single-shot pass.
  Makes vanilla runProject ship without a scenario override.

P4 happy-path scenario:
- fixtures/devloop-mock-scenarios/happy_path/devloop-architect.json —
  single-unit (todo-be only) Architect so end-to-end ship works with
  the baseline Coder/Tester (which only know todo-be paths).

Routes:
- server/routes/devloop.js:
  * POST /projects/:pid/sign-off — 400 InvalidProjectStatusTransition
    when status != 'shipped'; 200 returns { status }.
  * POST /projects/:pid/abandon  — body { by?, reason?, note? }; 400 on
    terminal state; 200 returns { status: 'abandoned' }.
  * POST /projects/:pid/feedback — body { text (req), by?,
    mockFixtureDir? }; 400 on missing text or shipped-final/abandoned;
    200 returns { prd_rev_before, prd_rev_after, status }.
  * POST /projects: now accepts optional `mockFixtureDir` so the same
    fixture dir threads through both the create call and later
    feedback (keeps mock-sequence counters aligned).

Static status page (replaces full Vue Dashboard for P4):
- server/public/devloop-status.html — adds:
  * Status badge in header (color-coded per status).
  * Sign Off / Abandon control buttons (disabled per current state).
  * Feedback textarea + Submit button → POST /feedback.
  * Buttons reflect FSM (signoff only when shipped; abandon/feedback
    locked at terminal states).

Acceptance:
- scripts/phase4-verify.js — 9 steps, full HTTP path:
  ① POST /projects → running
  ② POST /run → shipped
  ③ POST /feedback → PRD rev 1→2 + running (+ changelog entry)
  ④ POST /run again → shipped
  ⑤ POST /sign-off → shipped-final
  ⑥ POST /feedback (after sign-off) → 400
  ⑦ POST /sign-off (after sign-off) → 400
  ⑧ second project: POST /abandon → abandoned
  ⑨ POST /abandon (after abandon) → 400

Tests (+19 cases):
- server/tests/devloop/p4-l3-feedback.test.js
  * 14 FSM cases covering happy path + abandon path + signOff
    pre-conditions + empty feedback rejection.
  * 5 route cases via fetch on ephemeral express app.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- phase3-verify: 9/9
- phase4-verify: 9/9
- vitest devloop+acp-core: 213/213 (was 194 → +19)

Spec deviations explicit:
- Full Vue DevLoopDashboard.vue + Ops 4 sub-pages NOT implemented;
  static status page handles the demoable surface area instead.
- All backend endpoints from §P4 (sign-off, abandon, feedback) are
  complete and tested.

Specs: docs/prd/newfunction/_spec/plan-migration.md · P4 L3 + UI

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P3 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects/:pid/run drives the full project from L1
through L2 with 4 distinct BugTriager branches, observability via SSE
stream + bugs.ndjson + changelog.ndjson, and a tiny static status page.

Mock protocol — fallback dir:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * New options.mockFallbackDir: when scenario dir lacks a per-agent
    fixture, fall back to the baseline fixtures/devloop-mock/.
    Enables scenario dirs to override only the agents that differ
    (Integrator + Triager + sometimes Architect).

Scenario fixtures — 4 L2 branches:
- fixtures/devloop-mock-scenarios/contract_mismatch/
  * Architect: sequence[init, patch] — patch bumps sdd_rev → 2,
    units.json l2_rounds → 1, marks todo-be back to pending.
  * Integrator: sequence[fail (500 vs 201), pass].
  * Triager: contract_mismatch confidence 0.85 with proposed_sdd_patch.
- fixtures/devloop-mock-scenarios/impl_bug/
  * Integrator: sequence[fail (ReferenceError), pass].
  * Triager: impl_bug confidence 0.78 affected=[todo-be], proposed=null.
- fixtures/devloop-mock-scenarios/spec_ambiguous/
  * Triager: confidence 0.4 → LoopController emits human_intervention.
- fixtures/devloop-mock-scenarios/infra_flake/
  * Integrator: sequence[crashed (EADDRINUSE), pass].
  * Triager: infra_flake confidence 0.95 affected=[].
- Each scenario also includes a 1-unit (todo-be) Architect.init fixture
  so baseline Coder/Tester (todo-be) can drive L1.

LoopController:
- server/src/core/devloop/loop-controller.js — adds:
  * runProject(pid, opts) — wave-scheduled L1 via _groupUnitsByWave,
    runIntegrator (devloop-integrator), runTriager (devloop-triager),
    then branch dispatch:
      - contract_mismatch+conf≥0.5 → Architect(patch) writes new
        units.json (already pending, l2_rounds++); emits sdd.updated +
        changelog sdd_rev entry; loop back to L1.
      - impl_bug+conf≥0.5 → unitRegistry.reset(affected); loop, no
        budget burn.
      - spec_ambiguous OR conf<0.5 → emit human_intervention_needed
        SSE, exit l2_blocked.
      - infra_flake → loop directly (no reset, no budget burn).
  * runDocsPhase + runUnit + callAgent all thread opts.mockFixtureDir
    through to the protocol.
  * Auto-attaches sseBroker to unit-registry and bug-tracker on module
    load — every FSM transition + bug op fires an SSE event.
  * bug_open at integration failure, bug_transition → fixed when
    subsequent L2 round passes.

Routes:
- server/routes/devloop.js:
  * POST /projects/:pid/run now defaults to full runProject; ?only=<id>
    still drills into single-unit runUnit (P2 compatibility).
  * GET  /projects/:pid/stream — SSE with Last-Event-ID replay.
  * GET  /projects/:pid/bugs?status=&unit_id=&severity= — bug list.
- server/index.js + agent-server.js mount /public for static assets.

Static status page:
- server/public/devloop-status.html (~100 lines) — pure HTML, polls
  GET /state every 2s, renders unit DAG with status pills + timeline
  tail. URL ?pid= or input box.

Acceptance:
- scripts/phase3-verify.js — 9 steps across 4 scenarios + observability:
  ① contract_mismatch ships at sdd_rev=2 l2_rounds=1, sdd.updated SSE,
    changelog sdd_rev entry, bug open → fixed.
  ② impl_bug ships, sdd_rev=1, l2_rounds=0 (no budget burn).
  ③ spec_ambiguous → l2_blocked + human_intervention_needed SSE.
  ④ infra_flake ships, rerun_integrator action, l2_rounds=0.
  ⑤ Observability: timeline/bugs/changelog/stream.log present.
  ⑥ SSE replay from Last-Event-ID returns ≥2 historical events.

Tests (+13 cases):
- server/tests/devloop/run-project.test.js (11) — 4 scenarios end to
  end + SSE event capture.
- server/tests/devloop/routes.test.js (+2) — full-project mode + bugs
  404. Updated P2 ?only stub test → full-project 404 on unknown pid.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- phase3-verify: 9/9
- vitest devloop+acp-core: 194/194 (was 181 → +13)

Specs:
- docs/prd/newfunction/_spec/plan-migration.md · P3 验收
- docs/prd/newfunction/_spec/loops-l2.md (failure attribution + budget)
- docs/prd/newfunction/_spec/agents-integrator.md
- docs/prd/newfunction/_spec/agents-triager.md

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P2 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects/:pid/run?only=todo-be drives the L1 inner
loop (Coder → Tester → fail → Coder → Tester → pass), with the second
Coder pass demonstrably reflecting on the first failure.

Mock protocol — stateful sequences:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * Mock fixtures now support `sequence: [{chunks,result,files}, ...]`.
    Each protocol.connect() + sendPrompt() consumes the next variant;
    sticks on the last entry after exhausted.
  * Static `ClaudeCliProtocol.resetMockState()` clears counters between
    test runs.

Fixtures:
- fixtures/devloop-mock/devloop-architect.json — units.json now has
  status:pending + retries:0 + retry_budget per unit, plus
  units/{todo-be,todo-db,todo-fe}/spec.json so Tester has acceptance
  criteria to read.
- fixtures/devloop-mock/devloop-coder.json — sequence: implement (with
  intentional missing 400 branch) → retry (reflective fix, coder.log
  attempt:2 has last_failure/last_cause/this_fix/rationale).
- fixtures/devloop-mock/devloop-tester.json — sequence: fail (1/3
  failure with hint pointing at missing body validation) → pass (3/3).

LoopController:
- server/src/core/devloop/loop-controller.js — adds:
  * runUnit(pid, unitId, opts) — drives the L1 loop via unit-registry
    FSM (pending → coding → testing → failed → coding → testing →
    passed/blocked). Calls Coder then Tester per attempt; on failure,
    builds a retry context summarizing prior coder.log + tester
    failures and feeds it into the next Coder prompt.
  * _buildRetryContext + _findLatestTesterResult helpers.
  * callAgent now rewrites units.json.project_id to the real pid after
    mock writes (so unit-registry validation passes).

Route:
- server/routes/devloop.js — adds POST /projects/:pid/run?only=<unitId>.
  Without ?only, returns 501 (full project run lands in P3).

Acceptance:
- scripts/phase2-verify.js — 6 steps:
  1. POST /projects (PM + Architect)
  2. POST /run?only=todo-be returns ok=true, attempts=2, final=passed
  3. FSM trail matches expected 6-step transition sequence
  4. coder.log second entry has all 4 reflection fields
  5. runs/ has ≥2 result.json with first.ok=false, last.ok=true
  6. sandbox cross-unit + prd writes blocked by ToolSandboxError

Tests (5 new cases):
- server/tests/devloop/run-unit.test.js (4) — FSM trail, coder.log
  reflection, runs/ result chain, sandbox enforcement.
- server/tests/devloop/routes.test.js (+3) — POST /run validation,
  full P2 loop, 404 on unknown unit.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- phase2-verify: 6/6
- vitest devloop+acp-core: 181/181 (was 174 → +7)

Specs:
- docs/prd/newfunction/_spec/plan-migration.md · P2 验收
- docs/prd/newfunction/_spec/loops-l1.md (retryWithReflection)
- docs/prd/newfunction/_spec/agents-coder.md
- docs/prd/newfunction/_spec/agents-tester.md

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Implements the §P1 acceptance gate from plan-migration.md: a single
POST /api/devloop/projects produces a runnable todo-demo project with
multi-page PRD/SDD sites, units.json, integration spec, agent-state,
and history snapshots — all via mock agents (no real Claude CLI cost).

Code additions:
- packages/acp-core/protocol/ClaudeCliProtocol.js
  * mock mode now emits an extra `mock/files` acp_event when the fixture
    contains a files[] array. LoopController applies it to the project
    root, letting mock agents produce real outputs.
- server/src/core/devloop/loop-controller.js (now ~280 lines)
  * callAgent(pid, agentName, prompt, opts) — single-agent invocation:
    reads system/templates/{agent}/prompt.md, runs mock protocol,
    applies fixture files[], timeline-logs, auto-commits.
  * runDocsPhase(pid, requirement) — orchestrates PM → Architect with
    `docs.complete` timeline marker.
  * getProjectState(pid) — returns project.json + units + prd_rev/sdd_rev
    + timeline tail for the GET /state endpoint.
- server/routes/devloop.js (new)
  * POST /api/devloop/projects — createProject + runDocsPhase
  * GET  /api/devloop/projects
  * GET  /api/devloop/projects/:pid/state
- server/index.js / server/agent-server.js — mount /api/devloop.

Mock fixtures (drive the full acceptance file tree):
- fixtures/devloop-mock/devloop-pm.json
  * 14 files: prd/{index,reading-guide,product/*,feature/*,flow/*,prototype/*}.html,
    prd/assets/{shell.css,shell.js,search-index.json},
    agent-state/{pm.json,pm-todo.json}, history/prd-rev-001.html.
- fixtures/devloop-mock/devloop-architect.json
  * 13 files: sdd/{index,mvcp/*}.html, sdd/assets/*,
    units.json (3 units, DAG), integration/spec.json,
    agent-state/{architect.json,architect-todo.json}, history/sdd-rev-001.html.

Acceptance:
- scripts/phase1-verify.js — spins ephemeral express app, POSTs the
  todo-demo project, asserts 23 expected paths exist + 3 units with
  l2_rounds/l2_budget + git ≥4 commits + timeline events.

Tests (12 new cases):
- server/tests/devloop/loop-controller.test.js (7) — callAgent +
  runDocsPhase + state.
- server/tests/devloop/routes.test.js (5) — POST validation, full
  POST, GET state, 404 on unknown pid.

Results:
- phase0-verify: 8/8
- phase0-test-call: 7/7
- phase1-verify: 7/7
- vitest devloop+acp-core: 174/174 (was 162 → +12)

Specs: docs/prd/newfunction/_spec/plan-migration.md · P1 Docs MVP

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

1. Evolver agent.md: Added token budget rules
   - No re-reading unchanged files between iterations
   - Use head/grep instead of cat for large files
   - Concise output only (scores + diff summary, no full SKILL.md)
   - Cap at 5 iterations per session (was 10)
   - Early stop if score change < 2 points for 2 consecutive rounds

2. agent-chat.js: System prompt size guards
   - MAX_PROMPT_FILE_SIZE = 15KB per file (auto-truncate with warning)
   - MAX_TOTAL_PROMPT_SIZE = 100KB total (safety net)
   - Prevents runaway files from inflating context ever again

When a task completes and triggers a callback to the parent agent,
previously it always created a new convId (callback-{taskId}), spawning
a fresh CLI process with full system prompt re-injection.

Now it checks the sessions pool for an existing connected session of the
target agent and reuses its convId. This avoids creating a new CLI
process and saves the system prompt overhead (~30K tokens for master).

Falls back to creating new session if no active one exists.

Layer 1 (P0): Per-agent session mutex
- heartbeat-service.js: skip heartbeat if previous session still active (30min safety valve)
- agent-chat.js: reject concurrent /chat requests for same agentId with different convId (429)
  Multi-turn conversations on same convId still work normally

Layer 2 (P1): Advisory file lock utility
- server/utils/file-lock.js: O_EXCL-based .lock file mechanism
  Auto-cleanup stale locks, graceful degradation on timeout

Root cause: HeartbeatService creates new convId per heartbeat, spawning
independent Claude CLI processes that concurrently write config.json and
SKILL.md, causing rollbacks and FRAUDULENT scores.

- New template: content-selector with skills, train data (hunt/digest/evolve)
- youtube-crawler: add workspace archive, digest_v2, evolve_v2, mock data
- Update agent todo/plan/SKILL files for digester, evolver, hunter, innovator, master
- Update server/routes/agent-chat.js
- Update .gitignore: exclude runtime data (memory, sqlite, __pycache__, temp files)

…day window, skip old files

…writes (4KB/1s), remove messages.log fallback in loadHistory

…to prevent EADDRINUSE

1. Workspace page: left file tree + right detail/editor panel
   - File info: name, path, size, created/modified timestamps
   - Three view modes: Code / Preview / Edit with save
   - HTML files auto-open in Preview tab (sandboxed iframe)

2. Backend APIs:
   - GET/PUT /:companyId/workspace/files (list + content + save)
   - PUT /:companyId/files/content (company file save)

3. Navbar: removed Skills/Jobs/Pipeline, added Workspace
4. All nav links open in new tabs (target=_blank)

- Added inline editing for template description and type fields
- Implemented Delete Template functionality (removes both file system and registry entry)
- Added confirmation safeguards for the destructive delete action

Architecture fix for long-running tool execution:

1. ClaudeCliProtocol: Two-tier idle timeout
   - Chat mode: 45s (detect API hang/silent rate limit)
   - Tool execution mode: 5min (Bash long tasks like pip install)
   - Automatically switches on tool_use_start / content_block_stop events

2. Provision API: POST /templates/:templateId/provision
   - Runs shell commands directly via child_process.exec
   - Bypasses Claude ACP entirely (no idle timeout issue)
   - 10min per-command timeout, security blocklist
   - Frontend button with prompt for custom commands

3. Template UI: Added 🔧 安装依赖 button (teal)

Fixed 4 hidden bugs where path.join(DATA_ROOT, "system", ...) was used instead
of direct path.resolve to root-level system/:

- agent-chat.js: billing log scan (line 804) and agent list scan (line 909)
- company-service.js: TEMPLATES_DIR and GLOBAL_AGENTS_DIR constants
- heartbeat-service.js: system agents scan directory

These were missed because they used path.join with a variable (DATA_ROOT)
rather than the literal string "data/system" that sed caught.

- Moved data/system/ → system/ (agents, templates, skills, data, workspace)
- Updated all server route/service path references
- Updated all script path references
- Updated all documentation references
- Restructured .gitignore for cleaner system/ vs data/ boundary

system/ = platform-shared assets (system agents, template library)
data/ = tenant-specific company instance data

…aruncreate skill paths

- Upload skill files to .claude/skills/ (Claude Code ACP reads from here)
- Add conversation type filter (user/callback/task/train) to AgentChat
- Parse messages.log for richer conversation history display
- Fix idearuncreate template & company agent skill directory structure
- Add adm-zip dependency for ZIP extraction
- Add fs/path top-level requires in company.js

- Add TaskTimeline.vue: two-pane dashboard with task list + message timeline
- Add task-service.js: aggregate cross-agent conversations into task tree
  - 4-strategy parent-child inference (explicit meta, time-overlap, conv→tpl, master→T)
  - Read messages.log for full tool call details (not just history.json)
- Add tasks.js API routes: GET /api/tasks, GET /api/tasks/:taskId/timeline
- Mount /api/tasks in agent-server.js
- Add 'Task Logs' nav entry in AppNav.vue after Templates
- Support taskId in URL (/tasks/:taskId?) for sharing/bookmarking
- Add --parent flag to CLI task dispatch for explicit parentTaskId
- Auto-detect parentTaskId in task/dispatch from sender's active task
- Add --instructions flag to template train CLI command
- Update master tools.md with new parameters